Hostname: page-component-78c5997874-8bhkd Total loading time: 0 Render date: 2024-11-04T21:20:17.975Z Has data issue: false hasContentIssue false
  • English
  • Français

Electrical Conduction in Thermally Sprayed Thin Metallic Coatings

Published online by Cambridge University Press:  01 February 2011

Atin Sharma ,
Richard J. Gambino  and
Sanjay Sampath
Atin Sharma
Affiliation:
[email protected], State University of New York at Stony Brook, Materials Science and Engineering, 115, Engineering Bldg., Stony Brook, NY, 11794, United States, 631-632-8124, 631-632-8052
Richard J. Gambino
Affiliation:
[email protected], State University of New York at Stony Brook, Materials Science and Engineering
Sanjay Sampath
Affiliation:
[email protected], State University of New York at Stony Brook, Materials Science and Engineering
Get access

Abstract

The in-plane electrical conductivity and the apparent density of air plasma sprayed (APS) molybdenum coatings having thicknesses in the range 30 um to 450 um were measured as a function of coating thickness. Both conductivity and the apparent density were found to increase with thickness until a saturation density (∼ 80% of the bulk density of molybdenum metal) was achieved. Attributing this increase in the apparent density to the increased volume fraction of the metallic component (or decreased porosity volume) in the coatings allows for the treatment of the problem in a framework of percolation theories. In order to eliminate the contribution of surface roughness the results were further analyzed using a two-layer parallel resistor model of the coating. In this model the top layer, which was composed of coating roughness, was assumed to have fixed thickness and conductivity whereas the conductivity of the bottom layer was assumed to vary with thickness (density). A fit to the data obtained from the above model showed that the conductivity of the bottom layer obeys a power law relationship of the type σ α (V –Vc)n throughout the composition range (with n=1.72 and Vc=0.09). These results show that that the coatings behave as a three-dimensional percolation system [1] and also indicate the asymmetric shape of the metallic and insulator regions in the coatings [2].

Keywords

electrical propertiesplasma depositionmetal-insulator transition
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 890: Symposium Y – Surface Engineering for Manufacturing Applications , 2005 , 0890-Y09-11
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Dubson, M.A. and Garland, J.C., Phys. Rev. B 32, 7621 (1985) and references thereinGoogle Scholar
2. Smith, L.N. and Lobb, C.J., Phys. Rev. B 20, 3653 (1979)Google Scholar
3. Sampath, S., Longtin, J., Gambino, R., Herman, H., Greenlaw, R. and Tormey, E. in Direct-Write Technologies for Rapid Prototyping Applications, edited by Piqué, A. and Chrisey, D. B., (Academic Press, San Diego, CA, 2002) pp. 261–302 Google Scholar
4. Ahn, K., Wessels, B.W., Sampath, S., J. Mater. Res. 18, 1227 (2003)Google Scholar
5. Zallen, R., Physics of Amorphous Solids, (John Wiley & Sons, NY, 1983) pp.183–191 Google Scholar
6. Blood, P. and Orton, J.W., The electrical characterization of semiconductors: majority carriers and electron states, (Academic Press, San Diego, CA, 1992) pp.108–110 Google Scholar
7. Kirkpatrick, S., Rev. Mod. Phys. 45, 574 (1973)Google Scholar
8. Coutts, T.J., Thin Solid Films 38, 313 (1976)Google Scholar
9. McLachlan, D.S., Solid State Commun. 60, 821 (1986b)Google Scholar
10. Watson, B.P. and Leath, P.L., Phys. Rev. B 9, 4893 (1974)Google Scholar