Hostname: page-component-586b7cd67f-l7hp2 Total loading time: 0 Render date: 2024-11-25T18:00:45.256Z Has data issue: false hasContentIssue false
  • English
  • Français

Electrical and Structural Properties of Cobalt Annealed on Silicon-Germanium Epilayers

Published online by Cambridge University Press:  25 February 2011

G. Sarcona ,
F. Lin ,
M. K. Hatalis ,
A. F. Cserhati ,
Eva Austin  and
D. W. Greve
G. Sarcona
Affiliation:
Lehigh University, Dept. of Electrical Engineering and Computer Science, Sherman- Fairchild Center for Solid-State Studies, Bethlehem, PA 18015.
F. Lin
Affiliation:
Lehigh University, Dept. of Electrical Engineering and Computer Science, Sherman- Fairchild Center for Solid-State Studies, Bethlehem, PA 18015.
M. K. Hatalis
Affiliation:
Lehigh University, Dept. of Electrical Engineering and Computer Science, Sherman- Fairchild Center for Solid-State Studies, Bethlehem, PA 18015.
A. F. Cserhati
Affiliation:
Allied Signal Aerospace Co., ATC, Columbia, MD 21045.
Eva Austin
Affiliation:
Allied Signal Aerospace Co., ATC, Columbia, MD 21045.
D. W. Greve
Affiliation:
Carnegie-Mellon University, Dept. of Electrical and Computer Engineering, Pittsburgh, PA 15213.
Get access

Abstract

The structural and electrical properties of cobalt annealed on heteroepitaxial, strained-layer silicon-germanium were studied by transmission electron microscopy, four-point-probe and four-terminal resistor resistivity measurements, and junction diodes. The I50nm thick epitaxial p-Si0.87Ge0.13 was grown by UHV-CVD at 590°C. Cobalt was deposited by DC magnetron sputtering. The cobalt was rapid-thermally annealed at various temperatures in forming gas.

The cobalt film and the SiGe layer reacted, as illustrated by changes in their film thicknesses, and increased interfacial roughness. The roughness and reacted-film thickness increased with increasing temperature. The sheet resistances of the samples were dependant on the anneal temperature and time. Films formed by annealing at 700°C, 3 min, were 80nm thick, and had 2.8ω/sq sheet resistivity, corresponding to 20μω-cm resistivity. The contact was ohmic, with contact resistivity of l.6×10−4ω-cm2. SiGe/ Si heterojunction diodes contacted by the reacted film, containing Co, Si, and Ge, were compared to diodes contacted by aluminum.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 281: Symposium D – Semiconductor Heterostructures for Photonic and Electronic Applications , 1992 , 647
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Morgan, A. E., Broadbent, E. K., Delfino, M., Coulman, B., Sadana, D. K., J. Electrochem. Sci. 134, 925 (1987).Google Scholar
2. June, K. H., Kwong, D. L., Swenson, M. S., Boeck, B., Electronics Letters 25, 96 (1989).Google Scholar
3. Ronkamen, H., Drozdy, G., Franssila, S., Electron Dev. Letts. 12, 125 (1991).Google Scholar
4. Murarka, S. P., Silicides for VLSI Applications (Academic Press, NY, 1983).Google Scholar
5. Proctor, S. J. and Linholm, L,J., Electron Dev. Letts. 3, 294 (1982).Google Scholar
6. van Gurp, G. J. and Langereis, C., J. Appl. Physics 46 (10), 4301 (1975),Google Scholar
van Gurp, G. J. and Langereis, C., J. Appl. Physics 46 (10), 4708(1975).Google Scholar
7. Ashburn, S. P., Ozturk, M. C., Wortman, J. J., Harris, G., Honeycutt, J., Maher, D. H., J. Electronics Matls. 21, 81 (1992).Google Scholar