Hostname: page-component-586b7cd67f-gb8f7 Total loading time: 0 Render date: 2024-11-29T10:32:53.903Z Has data issue: false hasContentIssue false
  • English
  • Français

Effects of Processing Conditions on the Material Properties of Polyimide Thin Films

Published online by Cambridge University Press:  25 February 2011

Doug Pietila ,
Lisa DeBra ,
John Guan  and
Chung Lee
Doug Pietila
Affiliation:
MCC Assigned Researchers, Boeing Aerospace and Electronics, Seattle, WA
Lisa DeBra
Affiliation:
MCC Assigned Researchers, Boeing Aerospace and Electronics, Seattle, WA
John Guan
Affiliation:
MCC, Packaging and Interconnect Program, Austin, TX
Chung Lee
Affiliation:
MCC, Packaging and Interconnect Program, Austin, TX
Get access

Abstract

The effects of curing rate and solvent content prior to curing were examined for Hitachi PIX L110 polyimide thin films. DMA, TMA, DSC, and wafer bow measurements were used to elucidate in-plane storage modulus, Z-axis CTE, heat capacity, and residual stress dependencies on processing conditions and film position across the wafer. It was found that the residual stress and storage modulus are highly dependent on the processing conditions. Additionally, the heat capacity and storage modulus showed significant dependency on wafer position as well as processing conditions. The Z-axis CTE was found to deviate significantly from values published for the in-plane (xy) direction.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 203: Symposium D – Electronic Packaging Materials Science V , 1990 , 289
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

(1) Starvtsev, V. M., Kiselev, M. R. and Chugunova, N. F.,“Geometry and Nature of the Interfacial Layer in Polyimide Coatings” ANETEC, p 1036 (1990).Google Scholar
(2) Sato, H., Makino, D., Nimata, S. and Kinjo, N., “PIQ Polyimide for Multichip Module Application,” Proceedings of the Technical Program. NEPCON West 89, pp 921–4.Google Scholar
(3) Numata, S., Fujisaki, K. and Kinijo, N. “Re-examination of the relationship between packing coefficient and CTE for aromatic polyimides”, Polymer, Vol 28, 2282 (1987).Google Scholar
(4) Elsner, G., Kemp, J., Bartha, J. W. and Wagner, H. H., “Anisotropy of Thermal Expansion of Thin film Polyimide Films,” Thin Solid Films, 185, p. 189 (1990).Google Scholar
(5) Russell, T. R., Gugger, H., and Swalen, J. D., “In-Plane Orientation of Polyimide,” Journal of Polymer Science, Polymer Physics Edition, Vol. 21, 1745–1756 (1983).Google Scholar