Hostname: page-component-586b7cd67f-rdxmf Total loading time: 0 Render date: 2024-11-25T18:05:38.545Z Has data issue: false hasContentIssue false
  • English
  • Français

Effects of O2 Gas Addition on Diamond-Like Carbon Film Deposition

Published online by Cambridge University Press:  10 February 2011

N. Nakamura ,
T. Itani ,
H. Chiba ,
K. Watanabe  and
K. Kurihara
N. Nakamura
Affiliation:
Inorganic Materials & Polymers Laboratory, Fujitsu Laboratories LTD. 10-1, Morinosato-Wakamiya, Atsugi 243-0197, JAPAN E-mail: [email protected] itsu.co.jp
T. Itani
Affiliation:
Inorganic Materials & Polymers Laboratory, Fujitsu Laboratories LTD. 10-1, Morinosato-Wakamiya, Atsugi 243-0197, JAPAN E-mail: [email protected] itsu.co.jp
H. Chiba
Affiliation:
Inorganic Materials & Polymers Laboratory, Fujitsu Laboratories LTD. 10-1, Morinosato-Wakamiya, Atsugi 243-0197, JAPAN E-mail: [email protected] itsu.co.jp
K. Watanabe
Affiliation:
Inorganic Materials & Polymers Laboratory, Fujitsu Laboratories LTD. 10-1, Morinosato-Wakamiya, Atsugi 243-0197, JAPAN E-mail: [email protected] itsu.co.jp
K. Kurihara
Affiliation:
Inorganic Materials & Polymers Laboratory, Fujitsu Laboratories LTD. 10-1, Morinosato-Wakamiya, Atsugi 243-0197, JAPAN E-mail: [email protected] itsu.co.jp
Get access

Abstract

The role of 02 gas addition on the deposition of Diamond-like Carbon (DLC) film was studied for hard disk drive (HDD) media application. The influence of 02 gas mixing ratio on DLC film quality was investigated using the dc magnetron sputtering method with a solid graphite target and Ar, CH4 and 02 mixing gases. The 02 mixing ratio was varied between 0% and 50%. Film quality was evaluated using Raman spectroscopy and XPS. When 02 gas mixing ratio increased the peak in Raman spectra shifted gradually to higher wavenumbers and its bandwidth became narrower. This indicates graphite component increased in the DLC film. In addition, the lubricant coverage on oxygen-containing DLC was improved. Because adding oxygen increases the terminations of carbonyl group on DLC surface, this result suggests that the polar surface causes higher affinity for the lubricant

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 593: Symposium U – Amorphous & Nanostructured Carbon , 1999 , 415
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Merchant, K., Mee, P., Smalle, M., and Smith, S. IEEE Trans. Magnetics 26. 2688, (1990).Google Scholar
2. Kondo, H., Seki, A., Watanabe, H., and Seto, J., IEEE Trans. Magnetics 26, 2691, (1990).Google Scholar
3. Yanagisawa, M., J. Surf Sci. Soc. Jpn. 19, 392 (1998) [in Japanese].Google Scholar
4. Wu, R. L. C., Lanter, W. C., Wrbanek, J. D., Kosel, P. B., Miyoshi, K., and Dejoseph, C. A., 5th International Conference on the Applications of Diamond Films and Related Materials, edited by Yoshikawa, M., Koga, Y., Tzeng, Y, Klages, C.-P. and Miyoshi, K. pp.237–242.Google Scholar
5. Liou, Y., Inspector, A., Weiner, R., Knight, D., and Messier, R., J. Mater. Res. 11, 2305 (1990).Google Scholar
6. Muranaka, Y., Yamashita, H., and Miyadera, H., J. Appl. Phys. 69, 8145 (1991).Google Scholar
7. Tamor, M. A. and Vassell, W. C., J. Appl. Phys. 76, 3823 (1994).Google Scholar