Hostname: page-component-586b7cd67f-dlnhk Total loading time: 0 Render date: 2024-11-25T15:22:06.702Z Has data issue: false hasContentIssue false

The Effects of Microstructure on the Brightness of Pulsed Laser Deposited Y2O3:Eu Thin Film Phosphors for Field Emission Displays

Published online by Cambridge University Press:  14 March 2011

K. G. Cho
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville, FL 32611.
R. K. Singh
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville, FL 32611.
D. Kumar
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville, FL 32611.
P. H. Holloway
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville, FL 32611.
H-J. Gao
Affiliation:
Solid State Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831-6030.
S. J. Pennycook
Affiliation:
Solid State Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831-6030.
G. Russell
Affiliation:
PTCOE, Georgia Institute of Technology, Manufacturing Research Center, Atlanta, GA 30332.
B. K. Wagner
Affiliation:
PTCOE, Georgia Institute of Technology, Manufacturing Research Center, Atlanta, GA 30332.
Get access

Abstract

In order to investigate the effect of microstructure on the brightness of thin film phosphors for field emission displays, Y2O3:Eu thin film phosphors were prepared using pulsed laser deposition. To deconvolute the effects experimentally, the Y2O3:Eu films of controlled thickness and microstructure were prepared on various substrate materials such as amorphous quartz, (0001) sapphire, (100) lanthanum aluminate (LaAlO3), and (100) silicon wafers. Cathodoluminescent brightness and efficiency of the films were obtained in both transmission and reflection modes. The Y2O3:Eu films deposited on the quartz substrates showed the maximum brightness followed by the films on (0001) sapphire, (100) lanthanum aluminate (LaAlO3), and (100) silicon substrates. The role of interface scattering of the emitted light on the film brightness will be discussed together with changing surface roughness and film thickness.

Type
Research Article
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Jones, S. L., Kumar, D., Singh, R.K., and Holloway, P.H., Appl. Phys. Lett. 71 (3), 404 (1997).Google Scholar
2. Jones, S. L., Kumar, D., Singh, R. K., and Holloway, P. H., in Flat Panel Display Materials III edited by Fulks, R. T., Parsons, G.N., Slobod, D.E., and Yuzuriha, T. H., MRS Symp. Proc. 471, 299 (1997).Google Scholar
3. Jones, S. L., Kumar, D., Cho, K. G., Singh, R. K., and Holloway, P. H., Displays 19, 151 (1997).Google Scholar
4. Lee, Song Jae, Jpn. J. Appl. Phys. 37, 509 (1998).Google Scholar
5. Schnitzer, I., and Yablonovitch, E., Appl. Phys. Lett. 63 (16), 2174 (1993).Google Scholar
6. Cho, K. G., Kumar, D., Lee, D. G., Jones, S. L., Holloway, P. H., and Singh, R. K., Appl. Phys. Lett. 71 (23), 3335 (1997).Google Scholar
7. Cho, K. G., Kumar, D., Jones, S. L., Lee, D. G., Holloway, P. H., and Singh, R. K., J. Electrochem. Soc. 145, 3456 (1998).Google Scholar
8. Cho, K. G., Kumar, D., Chen, Z., Holloway, P. H., Singh, R. K., in Flat-Panel Displays and Sensors (Principles, Materials, and Processes) 1999 edited by Libsch, F.R., Chalamala, B., Friend, R., Jackson, T., and Ohshima, H., MRS Symp. Proc. 558, Spring meeting (1999).Google Scholar
9. Yoshioka, T., and Ogawa, M., in Phosphor Handbook edited by Shionoya, S., and Yen, W. M., CRC, New York, 683726 (1998).Google Scholar
10. Kumar, D., Cho, K. G., Chen, Z., Holloway, P.H., Singh, R. K., Phys. Rev. B 60 (19), 13331 (1999).Google Scholar
11. Gao, H-J., Kumar, D., Cho, K. G., Holloway, P. H., Singh, R. K., Fan, X. D., Yan, Y., and Pennycook, S. J., Appl. Phys. Lett. 75 (15), 2223 (1999).Google Scholar