Hostname: page-component-cd9895bd7-8ctnn Total loading time: 0 Render date: 2024-12-27T01:54:24.555Z Has data issue: false hasContentIssue false
  • English
  • Français

Effects of Electrode Configurations on Internal Stress Distribution of Multilayer Actuators

Published online by Cambridge University Press:  01 February 2011

Dong-Kyun Lee ,
Ji-Won Choi ,
Deuk-Young Han ,
Hyun-Jai Kim  and
Seok-Jin Yoon
Dong-Kyun Lee
Affiliation:
Department of Electrical Engineering, Konkuk University, Seoul, 143–701, Korea
Ji-Won Choi
Affiliation:
Thin Film Materials Research Center, Korea Institute of Science and Technology, Seoul 130–650, Korea
Deuk-Young Han
Affiliation:
Department of Electrical Engineering, Konkuk University, Seoul, 143–701, Korea
Hyun-Jai Kim
Affiliation:
Thin Film Materials Research Center, Korea Institute of Science and Technology, Seoul 130–650, Korea
Seok-Jin Yoon
Affiliation:
Thin Film Materials Research Center, Korea Institute of Science and Technology, Seoul 130–650, Korea
Get access

Abstract

The internal stress distribution in multilayer actuator was analyzed by a numerical simulation. Around the edge of conventional inter-digital electrodes, the non-uniform electric field generated the stress concentration, which caused the ceramic to crack. Various electrode configurations were presented to decrease this stress concentration. Especially the float electrode type is a promising design because this can be fabricated using almost the same process as the conventional multilayer actuator, and the simulated results indicted that the float electrode type decreased the stress concentration of inter-digital type in approximately 1/3.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 785: Symposium D – Materials and Devices for Smart Systems , 2003 , D6.9
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Im, I. H., Chung, H. S., Paik, D. S., Park, C. Y., Park, J. J., and Bae, S. G., “Multilayer piezoelectric actuator with AgPd internal electrode”, J. Euro. Ceram. Soc., 20, 1011–1015 (2000).10.1016/S0955-2219(99)00235-6Google Scholar
2. Aburatani, H., Harada, S., Uchino, K., and Furuta, A., “Destruction mechanism of ceramic multilayer actuators”, Jpn. J. Appl. Phys., 33, 3091–3094 (1994).10.1143/JJAP.33.3091Google Scholar
3. Zickgraf, B., Schneider, G. A., and Aldinger, F., “Fatigue behaviour of multilayer piezoelectric actuators”, Proceedings of the 9th IEEE International Symposium on Applications of Ferroelectrics, 325–328 (1994).Google Scholar
4. Furuta, A., and Uchino, K., “Dynamic observation of crack propagation in piezoelectric multilayer actuator”, J. Am. Ceram. Soc., 76, 1615–1617 (1993).10.1111/j.1151-2916.1993.tb03950.xGoogle Scholar
5. Uchino, K., “Ferroelectric devices”, Materials Engineering, 16 (2000).Google Scholar