Hostname: page-component-cd9895bd7-dzt6s Total loading time: 0 Render date: 2024-12-24T03:07:44.121Z Has data issue: false hasContentIssue false
  • English
  • Français

Effects of Annealing on Structural and Magnetic Properties of Cobalt Implanted TiO2 Thin Films

Published online by Cambridge University Press:  01 February 2011

W. Y. Luk ,
Q. Li ,
S. P. Wong ,
H. P. Ho ,
N. Ke  and
J. K. N. Lindner
W. Y. Luk
Affiliation:
[email protected], The Chinese University og Hong Kong, Physics, The Chinese University of Hong Kong, Shatin , Hong Kong, Shatin, N/A, Hong Kong
Q. Li
Affiliation:
[email protected], The Chinese University of Hong Kong, Department of Physics, Shatin, N/A, Hong Kong
S. P. Wong
Affiliation:
[email protected], The Chinese University of Hong Kong, Department of Electronic Engineering, Shatin, N/A, Hong Kong
H. P. Ho
Affiliation:
[email protected], The Chinese University of Hong Kong, Department of Electronic Engineering, Shatin, N/A, Hong Kong
N. Ke
Affiliation:
[email protected], The Chinese University of Hong Kong, Department of Electronic Engineering, Shatin, N/A, Hong Kong
J. K. N. Lindner
Affiliation:
[email protected], University of Augsburg, Institut fur Physik, Augsburg, N/A, Germany
Get access

Abstract

Since the observation of room-temperature ferromagnetism (RTFM) in Co-doped anatase TiO2 [1], there have been many reports on the study of the magnetic properties of Co-doped TiO2 prepared by various methods with diversified results. The origin of the RTFM in these systems is still a topic of controversy today. In this work, TiO2 thin films were prepared by RF sputtering onto thermally grown oxide layers on Si substrates. Cobalt implantation was performed using a metal vapor vacuum arc (MEVVA) ion source to various doses ranging from 3×1015 cm-2 to 4×1016 cm-2. Post-implantation annealing was performed in a vacuum chamber at various temperatures ranging from 400°C to 700°C for 2 hours and 4 hours. Characterization of these films as-implanted and after thermal annealing under various conditions was performed using Rutherford backscattering spectrometry, energy filtered and high-resolution transmission electron microscopy, x-ray diffractometry, x-ray photoelectron spectroscopy, and vibrating sample magnetometry. The dependence of the magnetic properties on the implantation and annealing conditions were studied in detail. Clear RTFM properties were observed. The saturation magnetic moment per implanted Co atom (MS) seems to increase with increasing dose within the implantation dose range in this study. At a fixed dose, the MS value also shows a generally increasing trend with increasing annealing temperature and annealing time. Quite a number of samples showed MS values exceeding the bulk Co value of 1.69 ìB/Co significantly and the maximum MS value observed is about 3.16 µB/Co. Such high MS values indicate that the RTFM must not come from Co clusters alone. Possible origins of the RTFM properties will be discussed in conjunction with the structural properties.

Keywords

ferromagneticion-implantationannealing
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 999: Symposium K – Novel Semiconductor Materials for Room-Temperature Ferromagnetism , 2007 , 0999-K05-07
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Matsumoto, Y., Murakami, M., Shono, T., Hasagawa, T., Fukumura, T., Kawasaki, M., Ahmet, P., Chikyow, T., Koshihara, S., and Koinuma, H., Science 291, 854 (2001).Google Scholar
2. Kim, D. H., Yang, J. S., Lee, K. W., Bu, S. D., Kim, D. W., Noh, T. W., Oh, S. J., Kim, Y. W., Chung, J. S., Tanaka, H., Lee, H. Y., Kawai, T., Won, J. Y., Park, S. H., and Lee, J. C., J. Appl. Phys. 93, 6125 (2003).Google Scholar
3. Chambers, S. A., Thevuthasan, S., , R, Farrow, F. C., Marks, R. F., Thiele, J. U., Folks, L., Samant, M. G., Kellock, A. J., Ruzycki, N., Ederer, D. L., and Diebold, U., Appl. Phys. Lett. 79, 3467 (2001).Google Scholar
4. Park, M.S., Kwon, S. K., and Min, B. I., Phys. Rev. B. 65, 161201 (2002).Google Scholar
5. Kim, D. H., Yang, J. S., Kim, Y. S., Kim, D.-W., and Noh, T.W., Appl. Phys. Lett. 83, 4574 (2003).Google Scholar
6. Mayer, M., SIMNRA User's Guide, Max-Planck-Institut für Plasmaphysik, Garching, Germany, 1997.Google Scholar
7. Ziegler, J.F., Biersack, J.P., Littmark, U., The stopping and range of ions in solids, Pergamon, New York, 1985.Google Scholar
8. Chambers, S. A., Droubay, T., Wang, C. M., Lea, A. S., Farrow, R. F. C., Folks, L., Deline, V. and Anders, S., Appl. Phys. Lett. 82, 1257 (2003).Google Scholar
9. Chambers, S. A., Heald, S. M. and Droubay, T., Phys. Rev. B 67, 100401 (2003).Google Scholar
10. Bryan, J. D., Heald, S. M., Chamber, S. A., and Gamelin, D. R., J. Am. Ceram. Soc. 126, 1640 (2004)Google Scholar
11. Kaspar, T. C., Droubay, T., Wang, C. M., Heald, S. M., Lea, A. S., and Chambers, S. A., J. Appl. Phys, 97 073511 (2005).Google Scholar
12. Coey, J. M. D., Venkatesan, M., and Fitzgerald, C. B., Nat. Mater. 4, 173 (2005).Google Scholar