Hostname: page-component-586b7cd67f-r5fsc Total loading time: 0 Render date: 2024-11-25T15:25:18.917Z Has data issue: false hasContentIssue false
  • English
  • Français

Effects of Addition of Heavy Rare-Earth Elements on the Structures and Resistivities of Al Thin Films for TFT - LCD Interconnects

Published online by Cambridge University Press:  10 February 2011

Shinji Takayama ,
Naganori Tsutsui  and
Zheng Zhudan
Shinji Takayama
Affiliation:
Hosei University, Dept. of Electrical Engineering, 3–7-2, Kajino-cho, Koganei, Tokyo, 184, Japan
Naganori Tsutsui
Affiliation:
ITES Co., Ltd, 800, Ichimiyake, Yasu-cho, Yasu-gun, Shiga, 520–23, Japan
Zheng Zhudan
Affiliation:
ITES Co., Ltd, 800, Ichimiyake, Yasu-cho, Yasu-gun, Shiga, 520–23, Japan
Get access

Abstract

The addition of Ho or Er to Al thin films markedly suppresses the grain growth at high temperature (350 °C – 450 °C). However, different from the effect of adding elements of Y, La, Pr, Nd, Sm, Gd, and Dy, thermal defects of hillocks or whiskers start to appear on the film surface after annealing at 300 °C ( though depending on the content of added elements). It has been revealed that small amounts of metallic compounds of Al3RE (RE = Ho and Er) have been segregated in a supersaturated solid solution of the Al phase after annealing at 300 °C, and that a large amount of added impurities still remained in the Al matrix. The resistivity of Al1−xREx alloy thin films (RE = Ho or Er, x = 2 – 7 atomic %) was 5 – 7 μΩcm after annealing at 450 °C.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 441: Thin Films – Structure and Morphology , 1996 , 107
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Yoshikawa, K., Nishi, S., Matsuzaki, H., Ohnishi, T., and Koga, Y., Materia Japan, 32, No. 8, 232 (1993) (in Japanese).Google Scholar
2. Yamamoto, M., Kobayashi, I., Hirose, T., Bruck, S. M., Tsuboi, N., Mino, Y., Okafuji, M., and Tamura, T., Proc. of SID 94, 142 (1994).Google Scholar
3. Lee, Y. K., Fujiwara, N., and Ito, T., J, Vac. Sci. Technol. B9, 2542 (1991).Google Scholar
4. Takayama, S. and Tsutsui, N., Extended Abstracts of the 1995 Int. Conf. on Solid State Devices and Materials (SSDM '95), Osaka, 1995, pp. 318–320.Google Scholar
5. Takayama, S. and Tsutsui, N., J. Vac. Sci. Technol. A 14 (4), 2499 (1996).Google Scholar
6. Takayama, S. and Tsutsui, N., Thin solid Films, vol.289, No.1–2, 289 (1996).Google Scholar
7. Takayama, S. and Tsutsui, N., J. Vac. Sci. Technol. B 14(5), 3257 (1996).Google Scholar
8. Takayama, S. and Tsutsui, N., submitted to Thin Solid Films, 1995, Oct.Google Scholar