Hostname: page-component-586b7cd67f-tf8b9 Total loading time: 0 Render date: 2024-11-23T19:11:18.266Z Has data issue: false hasContentIssue false
  • English
  • Français

Effect of Laser Energy and Laser Pulses on the Microstructure, Composition and Properties of Barium Strontium Titanate Thin Films Synthesized by Pulsed Laser Deposition

Published online by Cambridge University Press:  21 March 2011

Costas G. Fountzoulas ,
J. D. Demaree  and
Steven H. McKnight
Costas G. Fountzoulas
Affiliation:
Weapons and Materials Research Directorate, Army Research Laboratory, APG, MD, 21005-5069
J. D. Demaree
Affiliation:
Weapons and Materials Research Directorate, Army Research Laboratory, APG, MD, 21005-5069
Steven H. McKnight
Affiliation:
Weapons and Materials Research Directorate, Army Research Laboratory, APG, MD, 21005-5069
Get access

Abstract

Barium strontium titanate (BSTO) films were synthesized by the pulsed laser deposition technique (PLD) on silicon substrates at room temperature. The thin films were synthesized at ambient temperature and 30 mT oxygen partial pressure, with 300, 400 and 500 mJ/cm2 laser fluence at 5, 10 and 20 pulses per second on silicon wafer substrates. All films were subsequently post-annealed at 750°C in an continuous oxygen stream. The microstructure, crystallinity and lattice constant of the BSTO films were studied with the aid of atomic force microscopy (FEM) and Glancing Angle X-ray Diffraction analysis (GAXRD). The hardness and modulus of elasticity of the films were studied with the aid of a nanohardness indenter. The film stoichiometry was determined with the aid of Rutherford Backscattering Spectrometry (RBS). The results of this research will be combined with the results of our previous work [1, 2] on the effect of substrate temperature and oxygen partial pressure on the microstructure and properties of the BSTO films in order to construct a structural zone model (SZM) of the BSTO films synthesized by PLD.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 655 , 2000 , CC14.10.1
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Fountzoulas, C. G. and Sengupta, S., Thin Films-Stresses and Mechanical Properties VII, Mat. Res. Soc. Proc. 505 (1998)Google Scholar
2. Fountzoulas, C.G., Ngo, E.H., Hubbard, C.W., Joshi, P.C., Cole, M.W., Mat. Res. Soc. Proc 603 (1999)Google Scholar
3. Pulsed Laser Deposition of Thin Films, ed. Chrisley, D. B. and Hubler, G. k. (John Wiley and Sons 1994)Google Scholar
4. Huang, L. S. and Robson, T., Proc. IFIF 91 3rd International Symposium on Integrated Ferroelectrics, Colorado Springs, pp. 278–287 (1991)Google Scholar
5. Schwyn, Thöny, Lehmann, S. H. W., and Günter, P., Appl. Phys. Lett. 61 (4), pp. 373–375 (1992)10.1063/1.107914Google Scholar
6. Rou, S. H., Graettinger, T. M., Chow, A. F., Mat. Res. Soc. Proc. 243,pp. 81–91 (1992)Google Scholar
7. Fork, D. K., and Anderson, G. B., Appl. Phys. Lett. 63(8), pp. 1029–1031 (1990)Google Scholar
8. McKee, R. A., Walker, F. J., and Conner, J. R., Appl. Phys. Lett. 59 (7), pp. 782–784 (1991)Google Scholar
9. Lee, J., Ramesh, R. and Keramidas, V. G., Mat. Res. Soc. Proc, 361, 67 (1995).Google Scholar
10. Doolittle, L. R., Nucl. Instrum. Methods, B15, 227 (1980)Google Scholar
11. Preston, K. D. and Harting, G. H., Appl. Phys. Lett. 60 (23), 2831 (1992)Google Scholar
12. Baumert, B. A., Chang, L. H., Matsuda, A. T., Tsai, T. L., Tracy, C. J., Taylor, D. J., Otsuki, T., Fujii, E, Hayashi, a. and Suu, K., J. Appl. Phys., 82, (5), pp. 3558–3565 (1997)Google Scholar
13. Pharr, G. M., and Oliver, W. C., MRS Bulletin 17, 28 (1992)10.1557/S0883769400041634Google Scholar