Hostname: page-component-cd9895bd7-gbm5v Total loading time: 0 Render date: 2024-12-27T02:01:18.807Z Has data issue: false hasContentIssue false
  • English
  • Français

Effect of Fluorine Addition to Plasma-Enhanced Chemical Vapor Deposition Silicon Oxide Film

Published online by Cambridge University Press:  15 February 2011

S. W. Lim ,
M. Miyata ,
T. Naito ,
Y. Shimogaki ,
Y. Nakano ,
K. Tada  and
H. Komiyama
S. W. Lim
Affiliation:
Department of Chemical System Engineering, University of Tokyo
M. Miyata
Affiliation:
Department of Chemical System Engineering, University of Tokyo
T. Naito
Affiliation:
Department of Chemical System Engineering, University of Tokyo
Y. Shimogaki
Affiliation:
Department of Chemical System Engineering, University of Tokyo
Y. Nakano
Affiliation:
Department of Electronic Engineering, University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113, Japan, [email protected]
K. Tada
Affiliation:
Department of Electronic Engineering, University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113, Japan, [email protected]
H. Komiyama
Affiliation:
Department of Chemical System Engineering, University of Tokyo
Get access

Abstract

One solution to reduce the time constant of ultra large scale integrated circuit (ULSI) is the use of a low dielectric constant intermetal film like fluorinated silicon oxide (SiOF). We could obtain SiOF films with low dielectric constant as low as 2.6 and good step coverage by adding CF4 to SiH4 and N2O in plasma-enhanced chemical vapor deposition (PECVD) process. To investigate the dielectric constants due to each polarization and the reason for the decrease in the dielectric constant, we used capacitance-voltage (C-V) and ellipsometry measurements, and Kramers-Kronig transformation. The decrease in dielectric constant could not be completely explained by the reduction in ionic and electronic polarization. We could detect silanol groups, Si-OH in the films and their decrease with increasing CF4 flow rate. It is suggested that the main polarization component to decrease dielectric constant is such as orientational polarization. The step coverage of film was improved by adding CF4. It is suggested that the reduction in the sticking probability of films forming species due to the change in surface state improved the step coverage.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 443: Symposium H – Low-Dielectric Constant Materials II , 1996 , 143
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Hukada, T. and Akahori, T., Ext. Abstr. Int. Conf. Solid State Devices and Materials, Chiba, 158 (1993)Google Scholar
2. Usami, T., Shimokawa, K. and Yoshimaru, M., Ext. Abstr. Int. Conf. Solid State Devices and Materials, Chiba, 161 (1993)Google Scholar
3. Lim, S.W., Shimogaki, Y., Nakano, Y., Tada, K., and Komiyama, H., J. Electrochem. Soc. (submitted).Google Scholar
4. Murase, K., Jpn. J. Appl. Phy., 33, 1385 (1994)Google Scholar
5. Patrick, W. J., Schwartz, G. C., Chapple-Sokol, J. D., Carruthers, R. and Olsen, K., J. of Electrochem. Soc.,, 139, 2604 (1992)Google Scholar
6. Shimogaki, Y., Saito, T., Tadokoro, F., and Komiyama, H., Physique, J. de IV, colloq., 1, C2–95 (1991)Google Scholar