Hostname: page-component-586b7cd67f-g8jcs Total loading time: 0 Render date: 2024-11-25T15:18:44.870Z Has data issue: false hasContentIssue false
  • English
  • Français

Effect of Doping and Oxidation on Grain Growth in Polysilicon

Published online by Cambridge University Press:  15 February 2011

David A. Smith  and
T.Y. Tan
David A. Smith
Affiliation:
IBM T.J. Watson Research Center, Yorktown Heights, N.Y. 10598, USA
T.Y. Tan
Affiliation:
IBM T.J. Watson Research Center, Yorktown Heights, N.Y. 10598, USA
Get access

Abstract

We have studied the influence of doping and oxidation on grain growth of small grain polysilicon. Intrinsic and phosphorus doped (to 1021 /cc pseudo-amorphous layers of Si were prepared by chemical vapor decomposition of SiH4 at 600°C on thermally grown SiO2 on Si wafers. These samples were then annealed in N2 or O2 ambients at 1000°C for 30 minutes. Transmission electron microscopy examination of the samples revealed that grain boundary dislocations were commonly present at high angle boundaries and that there was a remarkable disparity in mean grain size, d, for the different samples. It was found that d was greater for (a) doped poly than intrinsic poly annealed in either N2 or O2, and (b) for the same polysilicon starting materials (doped or undoped) annealed in O2 than in N2. We propose that these phenomena may be explained by the influences of dopant and point defects on grain boundary dislocation mobility which in turn governs grain boundary migration. An atomistic model of grain boundary migration has been developed. A key aspect of the model is the formation and motion of jogs and kinks on grain boundary dislocations. These processes are directly influenced by the behavior of point defects in the material and its electronic properties.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 5: Symposium B – Grain Boundaries in Semiconductors , 1981 , 65
Copyright
Copyright © Materials Research Society 1982

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Grain boundary structure and kinetics (ASM, Metals Park, Ohio, 1979).Google Scholar
2. Sautter, H., Gleiter, H. and Bäro, G. Acta Met., 25, 467, (1977).Google Scholar
3. Clark, W.A.T. and Smith, D.A., Phil. Mag., 38, 367 (1978).Google Scholar
4. Pond, R.C. and Smith, D.A., Can. Met. Quart., 13, 39 (1974).Google Scholar
5. Smith, D.A., Vitek, V. and Pond, R.C., Acta Met., 25, 475 (1977).Google Scholar
6. Carter, C.B. and Föll, H., Scripta Met., 12, 1135 (1978).Google Scholar
7. Fontaine, C. and Smith, D.A., Appl. Phys. Letts., in press.Google Scholar
8. Krivanek, O.L., Isoda, S. and Kobayashi, K., Phil. Mag., 36, 931 (1977).CrossRefGoogle Scholar
9. Hornstra, J., Physica, 25, 409 (1959).Google Scholar
10. Möller, H.J., Phil. Mag A., 43, 1045, (1981).Google Scholar
11. Pond, R.C. and Vlacharas, D., Microscopy of Semiconducting Materials (Royal Microscopical Society, Oxford, 1981) in press.Google Scholar
12. Föll, H., IBM Report, RC8043, (1980).Google Scholar