Hostname: page-component-586b7cd67f-tf8b9 Total loading time: 0 Render date: 2024-11-27T10:52:21.819Z Has data issue: false hasContentIssue false
  • English
  • Français

The Effect of Cold Work on the Creep Properties of Copper

Published online by Cambridge University Press:  15 February 2011

Asa Martinsson  and
Henrik CM Andersson
Asa Martinsson
Affiliation:
Department of Manufacturing and Strength, Swerea KIMAB, Box 55970, 102 16 Stockholm, Sweden
Henrik CM Andersson
Affiliation:
Department of Manufacturing and Strength, Swerea KIMAB, Box 55970, 102 16 Stockholm, Sweden
Get access

Abstract

Spent nuclear fuel is in Sweden planned to be disposed of by encapsulating in waste packages consisting of a cast iron insert surrounded by a copper canister. The waste package is heavy. Throughout the manufacturing process from the extrusion/pierce-and-draw manufacturing to the final placement in the repository, the copper is subjected to handling which could introduce cold work in the material. It is well known that the creep properties of engineering materials at higher temperatures are affected by cold working.

The study includes creep testing of four series of cold worked, oxygen-free, phosphorus doped copper (Cu-OFP) at 75 °C. The results are compared to reference series for as-received material carried out in a recent study. Two series of copper cold worked in tension (12 and 24 %) and two series cold worked in compression (12 % parallel to creep load axis and 15 % perpendicular to creep load axis) were tested.

The results show that pre-straining in tension of copper leads to prolonged creep life at 75 °C. The creep rate and ductility are reduced. The influence on the creep properties increases with the amount of cold work. Cold work in compression applied along the creep load axis has no effect on the creep life or the creep rate. Nonetheless the ductility is still impaired. However, cold work in compression applied perpendicular to the creep load direction has a positive effect on the creep life. Cold work in both tension and compression results in a pronounced reduction of the initial strain on loading. Yet the high value of the area reduction, 90 %, is unaffected by the degree of cold work.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1193: Scientific Basis for Nuclear Waste Management XXXIII , 2009 , 521
Copyright
Copyright © Materials Research Society 2009

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Karlsson, K., Bodycote, Report TEK08-0309, Linkoping, Sweden (2008)Google Scholar
2 Unosson, M., Impetus Afea, Report R0056S-1, Huddinge, Sweden (2009)Google Scholar
3 Kowalewski, Z.L., XXI International Congress of Theoretical and Applied Mechanics, Warsaw, Poland, 15-21 August (2004)Google Scholar
4 Trampczynski, W.A., Acta metall. 20, 1035–1041 (1982)Google Scholar
5 Krafft, H., Practical Failure Analysis 1 (4), 47–50 (2001)Google Scholar
6 Gilbert, E.R., Garner, F.A., J of Nuclear Mat. 367-370, 954–959 (2007)Google Scholar
7 Kurata, Y., Nakajima, H., J. of Nuclear Mat. 228, 176–183 (1996)Google Scholar
8 Andersson, H.C.M., Seitisleam, F., Sandstrom, R., Swedish Nuclear Fuel and Waste Management Company, Report TR-07-08, Stockholm, Sweden (2007)Google Scholar
9 Andersson-Ostling, H.C.M, Swerea KIMAB, Report KIMAB-268013-2009, Stockholm, Sweden (2009)Google Scholar