Hostname: page-component-6bf8c574d5-rwnhh Total loading time: 0 Render date: 2025-02-20T14:49:21.053Z Has data issue: false hasContentIssue false
  • English
  • Français

The Effect of Cerium on Superplasticity of AL-6CU-0.35 MG-0.2ZR Alloy

Published online by Cambridge University Press:  16 February 2011

Wang Jingtao ,
Wu Qingling ,
Cul Jianzhong  and
Zhou Haitao
Wang Jingtao
Affiliation:
Dept. of Metal Forming, Northeast University of Technology, Wen Hua Lu, Heping District, Shenyang, 110006 P. R. China
Wu Qingling
Affiliation:
Dept. of Metal Forming, Northeast University of Technology, Wen Hua Lu, Heping District, Shenyang, 110006 P. R. China
Cul Jianzhong
Affiliation:
Dept. of Metal Forming, Northeast University of Technology, Wen Hua Lu, Heping District, Shenyang, 110006 P. R. China
Zhou Haitao
Affiliation:
Dept. of Metal Forming, Northeast University of Technology, Wen Hua Lu, Heping District, Shenyang, 110006 P. R. China
Get access

Abstract

The effect of Cerium addition on the superplasticity of Al-6Cu-0.35Mg-O.2Zr alloy is investigated. The superplastic elongation of the alloy is increased from 450% to 500–700% by the addition of 0.5wt% Cerium, with some decrease in superplastic tensile resistance, when the alloy is deformed at 789K(516°C) with a strain rate of 8.33×10−4S−1. Microstructure observation shows that the addition of Cerium decreases the grain growth rate both in static annealing and during superplastic deformation. This is considered to be the result of the enhanced pinning of fine Zirconium-rich precipitates and the additional pinning of Cerium-rich phase particles. TEM and X-ray diffraction analysis show that Cerium in the alloy forms Cerium-rich phases (AlgCu4Ce and Al4CuCe), and these phase particles join in the pinning of second phase particles on grain boundary, stablizing the microstructure. The addition of Cerium also affects the distribution of Zirconium and Zirconium Aluminide in the alloy.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 196: Symposium T – Superplasticity in Metals, Ceramics, and Intermetallics , 1990 , 283
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Watts, B. M., Stowell, M. J., Baikie, B. L., and Owen, D. G. E., Metals Science, 10, 198–206, (1976)Google Scholar
2. Aravamudhan, Ranabm, Z. Metall., 68, 163–172, (1977)Google Scholar
3. Jingtao, Wang, Qingling, Wu and Longxiang, Ma, Materials Forum, 10, 264–269, (1987)Google Scholar
4. Wang, Jingtao, Cui, Jianzhong, Wu, Qingling and Ma, Longxiang, in W=Ti=RE=Sb+88 Vol. II, edited by Fu, Chongyue (International Academic Publishers, Beijing, 1988) P1244.Google Scholar
5. Cheng, Jianing and Yu, Gulfu, Rare, Earth (a Journal of the Chinese Rare Earth Society, published in chinese), 1984, 1.Google Scholar
6. Hajime, Y. and Hiroshi, N., Journal of Japan Institute of Light Metals, 29 513–518, (1979)Google Scholar