Hostname: page-component-586b7cd67f-gb8f7 Total loading time: 0 Render date: 2024-11-25T19:26:16.794Z Has data issue: false hasContentIssue false
  • English
  • Français

EDX and EELS Analysis of Precipitates in HSLA Steels

Published online by Cambridge University Press:  25 February 2011

Z. Chen ,
M. H. Loretio  and
R. Cochrane
Z. Chen
Affiliation:
Department of Metallurgy and Materials, University of Birmingham, P.O. Box 363, Birmingham, B15 2TT, U.K.
M. H. Loretio
Affiliation:
Department of Metallurgy and Materials, University of Birmingham, P.O. Box 363, Birmingham, B15 2TT, U.K.
R. Cochrane
Affiliation:
British Steel Research Laboratories, Swinden House, Moorgate, Rotherham, S60 3AR, U.K.
Get access

Abstract

The sizes and compositions of precipitates in two weldable HSLA steels have been determined using analytical electron microscopy. It has been shown that the balance between the microalloy additions must be carefully controlled if the formation of very large precipitates in the cast slab is to be avoided. These large precipitates are very stable, some having been shown to be stable on reheating to about 1200°C and others are stable up to the melting point of the steel. The significance of these observations is briefly discussed in terms of the influence of these precipitates on the properties of the microalloyed steels.

Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 62: Symposium Q – Materials Problem Solving with the Transmission Electron Microscope , 1985 , 281
Copyright
Copyright © Materials Research Society 1986

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Kanazawa, S., Nakshima, A., Okamoto, K. and Kanaya., K. J. Trans. ISIJ 16 (9), 486 (1976).Google Scholar
2. Gondoh, H., Nakasugi, H., Matsuda, H., Tamehiro, H. and Chino., H. Nippon Steel Technical Report, 14, 55 (1979).Google Scholar
3. Nakasugi, H., Matsuda, H. and Tamehiro, H., in Steels for Line Pipe and Pipeline Fittings (The Metals Society Book 285, 1983), p. 90.Google Scholar
4. Houghton, D.C., Weatherly, G.C. and Embury, J.D., in Advances in the Physical Mettalurgy and Applications of Steels (The Metals Society Book 284, 1982), p.136.Google Scholar
5. Houghton, D.C., Weatherly, G.C. and Embury, J.D., in Thermomechaaical Processing of Microalloyed Austenite, edited by De Ardo, A.J., Ratz, G.A. and Wray, P.J. (The Met. Soc./AIME, 1982), p. 267.Google Scholar
6. Chen, Z., Loretto, M.H. and Cochrane, R., presented EMAG '85 (unpublished).Google Scholar