Hostname: page-component-586b7cd67f-t7czq Total loading time: 0 Render date: 2024-11-26T15:19:39.091Z Has data issue: false hasContentIssue false
  • English
  • Français

Dynamic Mechanical Analysis of Bulk Carbon Nanotube Materials

Published online by Cambridge University Press:  31 January 2011

Brian T. Moses ,
Paul R. Jarosz ,
Christopher M. Schauerman ,
Jack Alvarenga ,
Brian J. Landi  and
Ryne Raffaelle
Brian T. Moses
Affiliation:
[email protected], Rochester Institute of Technology, Nanopower Research Labs, Rochester, New York, United States
Paul R. Jarosz
Affiliation:
[email protected], Rochester Institute of Technology, Nanopower Research Labs, Rochester, New York, United States
Christopher M. Schauerman
Affiliation:
[email protected], Rochester Institute of Technology, Nanopower Research Labs, Rochester, New York, United States
Jack Alvarenga
Affiliation:
[email protected], Rochester Institute of Technology, Nanopower Research Labs, Rochester, New York, United States
Brian J. Landi
Affiliation:
[email protected], Rochester Institute of Technology, NanoPower Research Labs, Rochester, New York, United States
Ryne Raffaelle
Affiliation:
[email protected], Rochester Institute of Technology, Nanopower Research Labs, Rochester, New York, United States
Get access

Abstract

Several purification and processing techniques for laser-produced single wall carbon nanotube (SWCNT) soot were investigated and the resulting changes in the mechanical properties were characterized. SWCNT ribbons had non-nanotube carbonaceous content modified via thermal oxidation and the relationship between oxidation parameters and mechanical strength studied. SWCNT/Polyamide composites were developed and exhibited improved toughness, tensile strength and elongation before break. The composite material is observed to have a greater tensile strength than either the baseline paper or the added nylon.

Keywords

purificationstrengthC
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1204: Symposium K – Nanotubes and Related Nanostructures-2009 , 2009 , 1204-K18-48
Copyright
Copyright © Materials Research Society 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Liu, G., Zhao, Y., Deng, K. and Sun, L.. Nano Lett. 8, 1071–1075 (2008).Google Scholar
2. Popov, V.. Mater. Sci. Eng. R. 43, 61–102 (2004).Google Scholar
3. Henrad, L., Hernández, E., Bernier, P. and Rubio, A.. Phys. Rev. B 60, 8521–8524 (1999).Google Scholar
4. Gao, J., Zhao, B., Itkis, M. and Haddon, R.. J. Am. Chem. Soc. 128, 7492–7496 (2006).Google Scholar
5. Shim, B., Zhu, J., Critchley, K. and Kotov, N.. Am. Chem. Soc. Nano 3, 1711–1722 (2009).Google Scholar
6. Landi, B., Cress, C., Evans, C. and Raffaelle, R.. Chem. Mater. 17, 6819–6834 (2005).Google Scholar
7. Dillon, A., Gennett, T., Jones, K. and Heben, M, Adv. Mater. 11, 1354–1358 (1999).Google Scholar
8. Landi, B. and Raffaelle, R.. J. Nanosci. Nanotechnol. 7, 883–890 (2007).Google Scholar
9. Schauerman, C., Alvarenga, J., Cress, C. and Raffaelle, R.. Carbon. 47, 2431–235 (2009).10.1016/j.carbon.2009.04.046Google Scholar
10. Huang, H., Marie, J., Kajiura, H. and Ata, M.. Nano Lett. 2, 1117–1119 (2002).Google Scholar
11. Landi, B., Ruf, H., Worman, J. and Raffaelle, R.. J. Phys. Chem. B 108, 17089–17095 (2004).10.1021/jp047521jGoogle Scholar
12. Zhang, W., Shen, L., Phang, I. and Liu, T.. Macromolecules 37, 256–259 (2004).10.1021/ma035594fGoogle Scholar