Hostname: page-component-cd9895bd7-p9bg8 Total loading time: 0 Render date: 2024-12-27T01:48:20.567Z Has data issue: false hasContentIssue false
  • English
  • Français

Ductility Improvement of Direct-Cast Gamma TiAl-Based Alloy Sheet

Published online by Cambridge University Press:  15 February 2011

Toshihiro Hanamura  and
Keizo Hashimoto
Toshihiro Hanamura
Affiliation:
Advanced Technology Research Laboratories, Nippon Steel Corporation, 1618 Ida, Nakahara-ku, Kawasaki 211, Japan
Keizo Hashimoto
Affiliation:
Advanced Technology Research Laboratories, Nippon Steel Corporation, 1618 Ida, Nakahara-ku, Kawasaki 211, Japan
Get access

Abstract

For improving the room temperature tensile ductility of direct-cast gamma TiAl sheets without affecting their high-temperature strength, direct sheet casting with T1B2 particle dispersion is employed and conducted. The T1B2 addition and rapid cooling results in the formation of a fine equiaxed grain microstructure with an average grain size of ∼10μm, contributing to the increase in the room temperature ductility to 2.1% with the high-temperature tensile strength kept at about 200MPa. This improvement of room-temperature ductility is attributable to the following fact. The high oxygen content of this material, about 2500wt. ppm, is not harmful to the tensile ductility when the oxygen is in the solid solution of the 0:2 lamellar phase or in oxide particles, which are fine enough not to cause brittleness to the matrix. From these findings, a principle is proposed that oxygen is not harmful to the ductility of gamma TiAl when its microstructure containing oxygen is fine enough.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 460: Symposium Z – High-Temperature Ordered Intermetallic Alloys VII , 1996 , 71
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Lipsitt, H.A., Shechtman, D. and Shafrik, R.E., Metall. Trans. A6 (1975), 1991.Google Scholar
[2] Kawabata, T. and Izumi, O., Ser. Metall. 21 (1987), 433.Google Scholar
[3] Huang, S.C. and Siemers, P.A., Metall. Trans. A, 20A (1989), 1899.Google Scholar
[4] Hanamura, T., Uemori, R. and Tanino, M., J. Mater. Res., 3 (1989), 656.Google Scholar
[5] Kim, W.-Y. and Dimiduk, D.M., J. Metals, (1991), 40.Google Scholar
[6] Matsuo, M., Hanamura, T., Kimura, M., Masahashi, N., Mizoguchi, T. and Miyazawa, K., ISIJ International, 31 (1991), 3, 289.Google Scholar
[7] Hanamura, T. and Hashimoto, K., Mat. Res. Soc. Symp. Proc. 364 (1995), 775.Google Scholar
[8] Maeda, T., Anada, H., Okada, M., and Shida, Y., Intermetallic Compounds-Structure and Mechanical Properties, ed. Izumi, O. (Sendai, Japan Institute of Metals, 1991), 463.Google Scholar
[9] Nobuki, M., Vandershueren, D. and Nakamura, M., Acta Metall. Mater., 42 (1994), 2623.Google Scholar
[10] Petch, N.J., J. Iron and Steel Inst., 174 (1953), 25.Google Scholar
[11] Huang, S.C. and Hall, E.L., Mater. Res. Soc. Symp. Proc. 213 (Pittsburgh, PA 1991), 827.Google Scholar
[12] Larsen, D.E. Jr, Kampe, S., and Christodoulou, L., Mater. Res. Soc. Proc. 194 (Pittsburgh, PA, 1990) 285.Google Scholar
[13] Schwartz, D.S. and Shih, D., Mat. Res. Soc. Symp. Proc. 364 (1995), 787.Google Scholar
[14] Uemori, R., Hanamura, T. and Morikawa, H., Scripta Metall. Mater., 26 (1992), 969.Google Scholar
[15] Huguet, A. and Menand, A., Applied Science, 76/77 (1994), 191.Google Scholar