Hostname: page-component-745bb68f8f-s22k5 Total loading time: 0 Render date: 2025-01-14T02:35:52.952Z Has data issue: false hasContentIssue false
  • English
  • Français

Dual-Chamber Plasma Deposition of a-Si:H Solar Cells at High Rates Using Disilane

Published online by Cambridge University Press:  28 February 2011

G. Rajeswaran ,
P.E. Vanier ,
R.R. Corderman  and
F.J. Kampas
G. Rajeswaran
Affiliation:
Metallurgy and Materials Science Division, Brookhaven National Laboratory, Upton, NY 11973
P.E. Vanier
Affiliation:
Metallurgy and Materials Science Division, Brookhaven National Laboratory, Upton, NY 11973
R.R. Corderman
Affiliation:
Metallurgy and Materials Science Division, Brookhaven National Laboratory, Upton, NY 11973
F.J. Kampas
Affiliation:
Metallurgy and Materials Science Division, Brookhaven National Laboratory, Upton, NY 11973
Get access

Abstract

The use of a separated chamber deposition system for the fabrication of a-Si:H solar cells from disilane at high deposition rates results in a substantial improvement in short circuit current compared to that obtained from a single-chamber system. The spectral responses of cells fabricated in the dual-chamber mode are compared to those made in the single-chamber mode. The results are interpreted by assuming that the rate of removal of boron contaminants from the chamber is independent of deposition rate.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 49: Symposium F – Materials Issues in Applications of Amorphous Silicon Technology , 1985 , 27
Copyright
Copyright © Materials Research Society 1985

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Haruki, H., Sakai, H., Kamiyama, M., and Uchida, Y., Solar Energy Materials 8, 441 (1983).Google Scholar
2. Sichanugrist, P., Konagai, M., and Takahashi, K., Solar Energy Materials 11, 35 (1984).Google Scholar
3. Catalano, A., D'Aiello, R.V., Dresner, J., Faughnan, B., Firester, A., Kane, J., Schade, H., Smith, Z.E., Swartz, G., and Triano, A., Proc. 16th IEEE Photovoltaic Specialists Conf., (San Diego, CA), 1421 (1982).Google Scholar
4. Rajeswaran, G., Vanier, P.E., Corderman, R.R., and Kampas, F.J., Mat. Res. Soc. Fall Meeting, Nov. 1984; Proc. Symp. on Plasma Synthesis and Etching of Electronic Materials (in press).Google Scholar
5. Carlos, W. E., Naval Research Laboratory, private communication.Google Scholar
6. Okushi, H., Electrotechnical Laboratory, private communication.Google Scholar
7. Konagai, M., Matsushita, T., Sichanugrist, P., Takahashi, K., and Komori, K., Proc. 17th IEEE Photovoltaics Specialists Conference, Kissimmee, May 1984, 347–52.Google Scholar
8. Yamazaki, S., Mase, A., Urata, K., Shibata, K., Shinohara, H., Nagayama, S., Abe, M., Hamatani, T., and Suzuki, K., IEEE Elect. Dev. Lett., Vol. EDL–5, No. 8, Aug 1984.Google Scholar