Hostname: page-component-cd9895bd7-fscjk Total loading time: 0 Render date: 2024-12-27T02:38:50.700Z Has data issue: false hasContentIssue false
  • English
  • Français

A Drastic Change in Structure and Property of TiO2 Thin Films Deposited by Metal-Organic Chemical Vapor Deposition With Deposition Temperature

Published online by Cambridge University Press:  10 February 2011

Jeong-Hoon Park ,
Woon-Jo Cho  and
Kug-Sun Hong
Jeong-Hoon Park
Affiliation:
School of Materials Science and Engineering, Seoul National University, Seoul, 151-742, Korea
Woon-Jo Cho
Affiliation:
Photonics Research Center, Korea Institute of Science and Technology Seoul, 136-791, Korea
Kug-Sun Hong
Affiliation:
School of Materials Science and Engineering, Seoul National University, Seoul, 151-742, Korea
Get access

Abstract

TiO2 thin films were deposited by metal-organic chemical vapor deposition (MOCVD) method using titanium tetraisopropoxide(TTIP). A drastic change in structural aspect and its property occurred when the deposition temperature increased above 400°C. Deposition kinetics was proved to transit from reaction controlled regime into diffusion controlled regime above about 400°C in Arrehnius plot. In X-ray diffraction (XRD)and infrared reflectance spectra, it was observed that the crystallinity was decreased significantly around 400°C. The surface microstructure has changed explicitly from dense structure with larger grains to porous one with smaller grains observed by scanning electron microscopy and transmission electron microscopy. Electrical resistance of the films jumped by 2 orders of magnitude, which is measured by the 4-point probe method. The refractive index calculated by Swanepoel's method has decreased from 2.45 to 2.28 at 630nm. The porous microstructure of films deposited at above 400°C was thought to be responsible for the significant decrease in electrical conductivity and refractive index of the films.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 616: Symposium I – New Methods, Mechanisms & Models of Vapor Deposition , 2000 , 67
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Rausch, N. and Burte, E. P. J. Electrochem. Soc. 140, 145(1993)10.1149/1.2056076Google Scholar
2 Van, V. Nguyen, Fisson, S., Frigerio, J. M., Rivory, J., Vuye, G., Wang, Y. and Abelès, F., Thin solid films 253, 257(1994)Google Scholar
3 Hotsenpiller, P. A. Morris, Roshko, A., Lowekamp, J. B. and Rohrer, G. S., J. Cystal Growth 174, 424(1997)10.1016/S0022-0248(96)01138-4Google Scholar
4 Byun, C., Jang, J. W., Kim, I. T., Hong, K. S. and Lee, B.-W., Mat. Res. Bull. 32, 431(1997)10.1016/S0025-5408(96)00203-6Google Scholar
5 Lee, H. Y., Park, Y. H., Ko, K. H., Park, J. H. and Hong, K. S., J. Kor. Ceram. Soc. 36, 901(1999)Google Scholar
6 Bradley, D. C., Chem. Rev. 89, 1317(1989)10.1021/cr00096a004Google Scholar
7 Takeuchi, H., Izumi, H. and Kawasaki, A., Mat. Res. Soc. Proc. 334, 45(1994)10.1557/PROC-334-45Google Scholar
8 Swanepoel, R., J. Phys. E 16, 1214(1983)10.1088/0022-3735/16/12/023Google Scholar
9 Radecka, M., Zakrzewska, K., Czternastek, H. and ski, T. Stapi, Appl. Surf. Sci. 65/66, 227(1993)10.1016/0169-4332(93)90663-VGoogle Scholar