Hostname: page-component-586b7cd67f-2plfb Total loading time: 0 Render date: 2024-11-29T07:26:02.658Z Has data issue: false hasContentIssue false
  • English
  • Français

Dosimetric Assessment of Mono-Crystalline CVD Diamonds Exposed to Beta and Ultraviolet Radiation

Published online by Cambridge University Press:  31 January 2011

Martín Pedroza-Montero ,
Rodrigo Meléndrez-Amavizca ,
Sandra Preciado-Flores ,
Valery Chernov  and
Marcelino Barboza-Flores
Martín Pedroza-Montero
Affiliation:
[email protected], Universidad de Sonora, Hermosillo, Sonora, Mexico
Rodrigo Meléndrez-Amavizca
Affiliation:
[email protected], Universidad de Sonora, Hermosillo, Sonora, Mexico
Sandra Preciado-Flores
Affiliation:
[email protected], Universidad de Sonora, Hermosillo, Mexico
Valery Chernov
Affiliation:
[email protected], Universidad de Sonora, Hermosillo, Sonora, Mexico
Marcelino Barboza-Flores
Affiliation:
[email protected], Universidad de Sonora, Hermosillo, Sonora, Mexico
Get access

Abstract

Polycrystalline and mono-crystalline CVD diamonds have been investigated in relation to radiation dosimetry applications. In this work we report results on the thermoluminescence (TL), afterglow (AG) and dosimetric performance on two mono-crystalline CVD diamonds containing boron and silicon as doping materials. The samples were exposed to beta (Sr90/Y90) in the dose range of 0.07-8.26 Gy and UV light in the range of 200-400 nm, followed in both cases, by TL and AG read-outs. The boron doped sample exhibited one main TL peak at 130 °C and some overlapped peaks around 250 °C and the silicon doped samples exhibited two TL peaks around 148 and 286 °C after the crystals were subjected to beta radiation. UV radiation exposed samples showed two main TL peaks around 139 oC for boron doped, with overlapped components in the high temperature side, and at 220 and 355 oC for silicon doped samples. The integrated TL and AG intensities reached saturation around to 3.0 and 1.0 Gy in boron and silicon doped samples, respectively. The AG signal from boron doped samples reached saturation for around 60 s of 230 nm UV light irradiation and the silicon doped sample showed a linear response up to 10 minutes of 300 nm UV exposure with no apparent saturation for higher irradiation times. The TL/AG behavior of the present CVD diamond indicates the promising applications of these materials as TL/AG dosimeter for ionizing and UV radiation.

Keywords

diamondchemical vapor deposition (CVD) (deposition)radiation effects
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1203: Symposium J – Diamond Electronics and Bioelectronics-Fundamentals to Applications III , 2009 , 1203-J17-35
Copyright
Copyright © Materials Research Society 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Balducci, A., Garino, Y., Giudice, A. Lo, Manfredotti, C., Marinelli, Marco, Pucella, G. and Verona-Rinati, G., Diamond & Related Materials 15, 797 (2006).Google Scholar
2 Barboza-Flores, M., Schreck, M., Preciado-Flores, S., Meléndrez, R., Pedroza-Montero, M. and Chernov, V., Phys. Stat. Sol. (a) 204, 3047 (2007).Google Scholar
3 Descamps, C., Tromson, D., Guerrero, M. J., Mer, C., Rzepka, E., Nesladek, M. and Bergonzo, P., Diamond & Related Materials 15, 833 (2006)Google Scholar
4 Preciado-Flores, S., Schreck, M., Meléndrez, R., Chernov, V., Pedroza-Montero, M. and Barboza-Flores, M., Phys. Stat. Sol. (a) 203, 3173 (2006).Google Scholar
5 Manfredotti, C., Giudice, A. Lo, Medunic, S., Jaksic, M. and Colombo, E., Mater. Res. Soc. Symp. Proc. 908E, 20.1 (2006).Google Scholar
6 Zhang, Minglong, Xia, Yibean, Wang, Linjun, Gu, Beibei, Journal of Crystal Growth 227, 382 (2005)Google Scholar
7 Kaneko, J. H., Teraji, T., Hirai, Y., Shiraishi, M. and Kawamura, S., Review of Scientific Instruments 75, 3581 (2004).Google Scholar
8 Iakoubovskii, K., Stesmans, A., Suzuki, K., Kuwabara, J., Sawabe, A., Diamond and Related Materials 12, 511 (2003).Google Scholar
9 Galbiati, A., Lynn, S., Oliver, K., Schirru, F., Nowak, T., Marczewska, B., Dueñas, J. A., Berjillos, R., Martel, I. and Lavergne, L., IEEE Transactions on Nuclear Science 56, 1863 (2009).Google Scholar
10 Morse, J., Salomé, M., Berdermann, E., Pomorski, M., Grant, J., O'Shea, V. and Ilinski, P., Mater. Res. Soc. Symp. Proc. 1039, P06–02 (2008).Google Scholar
11 Chevallier, J., Ballutaud, D., Theys, B., Jomard, F., Deneuville, A., Gheeraert, E. and Pruvost, F., Phys. Stat. Sol. (a) 174, 73 (1999).Google Scholar