Hostname: page-component-6bf8c574d5-gr6zb Total loading time: 0 Render date: 2025-02-18T06:44:50.870Z Has data issue: false hasContentIssue false
  • English
  • Français

Development of Texture-Controlled Bulky Actuator/Sensor Materials by Combining Rapid-Solidified Fiber/Ribbon Elements and Spark Plasma Sintering/Joining(SPSJ)

Published online by Cambridge University Press:  01 February 2011

Y. Furuya ,
M. Yokoyama ,
C. Saito ,
T. Okazaki  and
M. Omori
Y. Furuya
Affiliation:
Faculty of Science and Technology, Hirosaki University, Hirosaki 036–8651, Japan
M. Yokoyama
Affiliation:
Graduate Student, Hirosaki University, Hirosaki 036–8651, Japan
C. Saito
Affiliation:
Graduate Student, Hirosaki University, Hirosaki 036–8651, Japan
T. Okazaki
Affiliation:
Faculty of Science and Technology, Hirosaki University, Hirosaki 036–8651, Japan
M. Omori
Affiliation:
IMR, Tohoku University. Sendai, 980–8577, Japan
Get access

Abstract

The authors have showed that rapid-solidified (RS) melt-spun fiber/ribbon/foil type samples have very often strongly textured fine columnar grains, and those can have very high performance of the metallic actuator/sensor properties. However, as for the applications of these sample materials in smart material systems, the developed rapid-solidified samples are thought to be inevitably too small force to move the machines and structures in the engineering field. In this paper, we propose one novel material processing technique that can produce the bulk type solid-state actuator/sensor materials by combing the rapid-solidified fiber/ribbon and short time spark plasma sintering/joining (SPS) method. The produced samples, both 1) the disk-type sample from stacked layers of RS-ribbons and 2)the sintered compact from ball-milled RS-fibers of shape memory Ti50Ni40Cu10 (NITINOL) alloy, showed clear thermoelastic phase transformation by DSC evaluation as well as shape recovery. The same approach was also tried for making bulky magnetostrictive FeGa(Galfenol) alloy systems from stacked FeGa ribbons. Laminated FeGa ribbons maintained large magnetostriction of about 100–200ppm under increasing stressed condition as much as in the case of the strongly textured ribbon sample.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 785: Symposium D – Materials and Devices for Smart Systems , 2003 , D12.8
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Furuya, Y., 2000, Rapid-solidified Actuator Materials Developed by Electromagnetic Nozzleless Melt Spinning Method, Proc. MRS vol. 604, (2000)pp. 108–116 Google Scholar
2. Furuya, Y., Yaguchi, H., Saito, M, Taya, M., Watanabe, R., Design and Mechanical Properties of Smart TiNi Fiber/Al Matrix Composite and its Fracture Process, Proc.4th ICIM (Tokyo),(1998)pp. 64–67 Google Scholar
3. Yokoyama, M., Furuya, Y., Omori, M., Bulky Material Processing Based on Rapid-solidified New Functional Material Elements, Proc. JSME 2003 Annual Meeting, No.03–06(Tokushima, Japan)(2003)pp. 256–257 Google Scholar
4. Clark, A. E., Restorff, J. B., Wun-Fogle, M., Lograsso, T. A., and Schlagel, D. L., Magnetostrictive properties of body-centered cubic Fe-Ga and Fe-Ga-Al alloys, IEEE Trans. Magn., vol. 36, (Sept. 2000)pp. 3238–3240,.10.1109/20.908752Google Scholar
5. Furuya, Y., Saito, C., and Okazaki, T., Large magnetostriction in Fe-Ga rapid-solidified alloy, J. Japan Inst. Metals, vol. 66, (2002)pp. 901–904,.10.2320/jinstmet1952.66.9_901Google Scholar
6. Saito, C., Furuya, Y., Okazaki, T., Watanabe, T., Matsuzaki, T., and Wuttig, M., Microstructure and magnetostriction of rapid-solidified Fe-Ga system alloys, Mater. Trans., JIM, submitted for publication. (in printing)Google Scholar
7. Omori, M., Sintering, consolidation, reaction and crystal growth by the spark plasma system (SPS), Mater. Sci. Eng. A, vol. 287,(Aug. 2000) pp 183–188,.10.1016/S0921-5093(00)00773-5Google Scholar