Hostname: page-component-586b7cd67f-2brh9 Total loading time: 0 Render date: 2024-11-25T15:40:57.674Z Has data issue: false hasContentIssue false
  • English
  • Français

Development of Nondestructive Method for Prediction of Crack Instability

Published online by Cambridge University Press:  10 February 2011

J. L. Schroeder ,
D. Eylon ,
E. B. Shell  and
T. E. Matikas
J. L. Schroeder
Affiliation:
Center for Materials Diagnostics, University of Dayton, Dayton OH 45469-0121
D. Eylon
Affiliation:
Graduate Materials Engineering, University of Dayton, Dayton OH 45469-0240
E. B. Shell
Affiliation:
Center for Materials Diagnostics, University of Dayton, Dayton OH 45469-0121
T. E. Matikas
Affiliation:
Former Director of the Center for Materials Diagnostics, University of Dayton
Get access

Abstract

A method to characterize the deformation zone at a crack tip and predict upcoming fracture under load using white light interference microscopy was developed and studied. Cracks were initiated in notched Ti-6A1-4V specimens through fatigue loading. Following crack initiation, specimens were subjected to static loading during in-situ observation of the deformation area ahead of the crack. Nondestructive in-situ observations were performed using white light interference microscopy. Profilometer measurements quantified the area, volume, and shape of the deformation ahead of the crack front. Results showed an exponential relationship between the area and volume of deformation and the stress intensity factor of the cracked alloy. These findings also indicate that it is possible to determine a critical rate of change in deformation versus the stress intensity factor that can predict oncoming catastrophic failure. In addition, crack front deformation zones were measured as a function of time under sustained load, and crack tip deformation zone enlargement over time was observed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 591 , 1999 , 61
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Finney, J. M., “Fatigue Crack Growth in Metallic Military Aircraft Structures,” Handbook of Fatigue Crack Propagation in Metallic Structures. (Vol. 2, Elsevier Science B.V., 1994) pp. 1539–1541.Google Scholar
2.Nakajima, K., Terao, K., and Miyata, T., “The effect of microstructure on fatigue crack propagation of α+β titanium alloys In-situ observation of short fatigue crack growth,” Materials Science and Engineering, A243, 176–181 (1998).Google Scholar
3.Niinomi, M. and Kobayashi, T., “Fracture characteristics analysis related to the microstructures in titanium alloys,” Materials Science and Engineering, A213, 16–24 (1996).Google Scholar
4.Bowe, Brain and Toal, Vincent, “White light interferometric surface profiler,” Optical Engineering, 37(6), 1796–1799 (1998).Google Scholar
5.WYKO, Surface profilers technical reference manual, (WYKO Corporation, Tuscon AZ, 1996).Google Scholar
6.Hertzberg, Richard W., Deformation and Fracture Mechanics of Engineering Materials, (John Wiley & Sons, New York, New York, 1983), pp. 279–280.Google Scholar