Hostname: page-component-cd9895bd7-7cvxr Total loading time: 0 Render date: 2024-12-27T01:55:06.594Z Has data issue: false hasContentIssue false
  • English
  • Français

Development of a Wireless MEMS Inertial System for Health Monitoring of Structures

Published online by Cambridge University Press:  01 February 2011

Ronald Kok ,
Cosme Furlong  and
Ryszard J. Pryputniewicz
Ronald Kok
Affiliation:
NEST – NanoEngineering, Science, and Technology, CHSLT – Center for Holographic Studies and Laser micro-mechaTronics, Mechanical Engineering Department, Worcester Polytechnic Institute, Worcester, MA 01609, U.S.A.
Cosme Furlong
Affiliation:
NEST – NanoEngineering, Science, and Technology, CHSLT – Center for Holographic Studies and Laser micro-mechaTronics, Mechanical Engineering Department, Worcester Polytechnic Institute, Worcester, MA 01609, U.S.A.
Ryszard J. Pryputniewicz
Affiliation:
NEST – NanoEngineering, Science, and Technology, CHSLT – Center for Holographic Studies and Laser micro-mechaTronics, Mechanical Engineering Department, Worcester Polytechnic Institute, Worcester, MA 01609, U.S.A.
Get access

Abstract

Advancements in microelectromechanical technologies have lead to progressive design of small footprint, low dynamic mass and actuation power, and high-resolution MEMS inertial sensors. In this paper, development of instrumentation and methodologies for wireless health monitoring of structures using MEMS inertial sensors is presented. A dedicated experimental setup is developed to characterize specific MEMS inertial sensors and structures. Studies presented in this paper include development and characterization of a prototype wireless data acquisition system to transmit analog and digital signals. Results show that the frequency response of the prototype wireless data acquisition system is compatible with the frequency response of the MEMS inertial sensors utilized. The prototype wireless MEMS inertial system is applied to perform tilt and rotation measurements. It is shown that with the wireless MEMS system it is possible to achieve an angular resolution of 1.8 mrad.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 785: Symposium D – Materials and Devices for Smart Systems , 2003 , D11.5
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Kovacs, G. T. A, Micromachined transducers sourcebook, McGraw-Hill, New York, 1998.Google Scholar
2. Hsu, T-R., MEMS & microsystems: design and manufacture, McGraw-Hill, New York, 2002.Google Scholar
3. Pryputniewicz, R. J. and Furlong, C., MEMS and nanotechnology, Worcester Polytechnic Institute, Worcester, MA, 2002.Google Scholar
4. Kok, R., Application of MEMS accelerometers to modal analysis of structures, MS Thesis, Worcester Polytechnic Institute, Worcester, MA, in preparation.Google Scholar
5. Furlong, C. and Pryputniewicz, R. J., Proc. SPIE, 4778:1–10, 2002.10.1117/12.473551Google Scholar
6. Application Note, “ADXL202 / ADXL210 - low cost ±2 g / ±10 g dual axis iMEMS® accelerometers with digital output”, Analog Devices, Inc., Norwood, MA, 2001.Google Scholar
7. Analog Devices, Inc., http://www.analog.com, Norwood, MA, 2003.Google Scholar
8. Thomson, W. T. and Dahleh, M. D., Theory of vibration with applications, 5th ed., Prentice Hall, Upper Saddle River, New Jersey, 1998.Google Scholar
9. Rao, S. S., Mechanical vibrations, 3rd ed., Addison-Wesley, New York, NY, 1995.Google Scholar
10. LINX Technologies, Inc., http://www.linxtechnologies.com, Grant Pass, OR, 2003.Google Scholar