Hostname: page-component-586b7cd67f-t8hqh Total loading time: 0 Render date: 2024-11-29T07:24:12.469Z Has data issue: false hasContentIssue false
  • English
  • Français

Development of a Model of on-Board Pemfc Powered Locomotive with a Metal Hydride Cylinder

Published online by Cambridge University Press:  15 February 2011

H. Hasegawa  and
Y. Ohki
H. Hasegawa
Affiliation:
Prototype Manufacturing Center, Railway Technical Research Institute, 2-8-38, Hikari-Cho, Kokubunji-Shi, Tokyo, 185, Japan
Y. Ohki
Affiliation:
Prototype Manufacturing Center, Railway Technical Research Institute, 2-8-38, Hikari-Cho, Kokubunji-Shi, Tokyo, 185, Japan
Get access

Abstract

This paper presents a phase-zero evaluation case of installing on-off-board hybrid powered Electric Motor Vehicle (EMV) in existing and new local line and reports development of a model fuel cell powered locomotive. EMV such as electric car and locomotive are a new conceptual EMV using hybrid power between off-board substation and on-board Regenerative Fuel Cell (RFC) power system with Metal Hydride (MH) stored hydrogen generated with water electrolyzer by off-board surplus power. In this study, it is estimated a possibility to close power gap over 30 % in placing the new conceptual vehicle. The Locomotive is a 110 cm long locomotive powered by a 20 W PEMFC configured with 20 cells and supplied with about 2 g hydrogen, from a cylinder of 100 g metal hydride, and natural convection air (02). Measuring 50 cm (W), 50 cm (H), and weighting 25.9 kgf, the locomotive has a permanent magnet motor with a rated power 38 W (12 V, 3 A) and ran on railway that has a gauge of 126 mm (3'6“/8.5=4.94”), a length of 100 m. The performance of this train was acceleration of 0.5 m/s, cruising speed of 4.1 m/s at traction force of 15.8 N (1.6 kgf), average rolling friction of 5 N (460 gf).

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 393: Symposium W – Materials for Electrochemical Energy Storage and Conversion , 1995 , 145
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1 “Feasibility Evaluation of Fuel Cells for Selected Heavy-Duty Transportation Systems,” Los Alamos National Laboratory, March 31,1982.Google Scholar
2 “RESEARCH AND DEVELOPMENT OF FUEL CELL PROPULSION SYSTEMS FOR LOCOMOTIVE APPLICATIONS,” U. S. Department of Energy, February 6,1995.Google Scholar
3 “Development of a Locomotive using Portable PEMFC system with Metal Hydride Tank,” H. Hasegawa and Y. Ohki, Nov. 14 1994, The 35 th Battery Symposium in Japan.Google Scholar
4 “Starting characteristics of Polymer Electrolyte Membrane Fuel-Cell, at locomotive running,” Hasegawa, H. and Ohki, Y., 1995 NATIONAL CONVENTION RECORD I.E.E. JAPAN.Google Scholar