Hostname: page-component-586b7cd67f-gb8f7 Total loading time: 0 Render date: 2024-11-20T08:34:23.947Z Has data issue: false hasContentIssue false
  • English
  • Français

Degree of Crystallinity and Strain in B4C and SiC Thin Films as a Function of Processing Conditions

Published online by Cambridge University Press:  10 February 2011

J. Hershberger ,
Z. U. Rek ,
F. Kustas ,
S. M. Yalisove  and
J. C. Bilello
J. Hershberger
Affiliation:
Center for Nanomaterials Science, University of Michigan, Department of Materials Science & Engineering, Ann Arbor, MI 48105. [email protected]
Z. U. Rek
Affiliation:
Stanford Synchrotron Radiation Laboratory, Stanford, CA 94309
F. Kustas
Affiliation:
Technology Assessment and Transfer, Annapolis, MD 21401. Now at Lockheed-Martin, Denver CO
S. M. Yalisove
Affiliation:
Center for Nanomaterials Science, University of Michigan, Department of Materials Science & Engineering, Ann Arbor, MI 48105.
J. C. Bilello
Affiliation:
Center for Nanomaterials Science, University of Michigan, Department of Materials Science & Engineering, Ann Arbor, MI 48105.
Get access

Abstract

Amorphous and crystalline content in sputtered B4C and SiC thin films has been analyzed by synchrotron grazing incidence x-ray scattering (GIXS). GIXS provided quantitative information on the average structure while TEM was used to find inhomogeneities such as small volume fraction phases. GIXS results were compared to simulations to determine average particle size or bond length for crystalline or amorphous phases respectively. In this work, we compared results from films deposited with, and without, an RF bias applied to the substrate during deposition. Results indicated that SiC can be described as strained polycrystalline material with particle size of approximately 13 Å for biased samples and 9Å for unbiased samples. Boron carbide deposited without bias was completely crystalline with a particle size of approximately 30 Å, while the data suggested that B4C deposited with bias is amorphous. The scattering from the biased materials was Fourier transformed to yield radial distribution functions (RDF). This provided nearest neighbor distances, and it was demonstrated that the technique can be used to determine full three-dimensional strain tensors in amorphous thin films.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 524: Symposium V – Application of Synchrotron Radiation Techniques…IV , 1998 , 109
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Chason, E., Mayer, T. M., Kellerman, B. K., McIlroy, D. T., and Howard, A. J., Phys. Rev. Lett. 72 (19), 3040 (1994).Google Scholar
2. Hershberger, J., Ying, T., Kustas, F., Fehrenbacher, L., Yalisove, S. M., Bilello, J. C., Surf. Coat. Tech. 86–87, 237 (1996).Google Scholar
3. Mattox, D. M., Thin Solid Films 53, 81–96 (1978).Google Scholar
4. Thornton, J. A., J. Vac. Sci. Technol. A 4 (6), 3059 (1986).Google Scholar
5. Windischmann, H., Crit. Rev. Sol. State and Mat. Sci. 17 (6), 547 (1992).Google Scholar
6. McKernan, M. A., Surf. Coat. Tech. 49, 411 (1991).Google Scholar
7. Hirohata, Y., Nemoto, Y., Hino, T., and Yamashina, T., Thin Solid Films 214, 150 (1992).Google Scholar
8. Hershberger, J., Rek, Z. U., Yalisove, S. M. , Bilello, J. C., “Structure of an Amorphous Thin Buried Layer”, accepted for publication in SSRL 1997 Activity Report Proposal 2346.Google Scholar
9. Schwartz, L. H., Cohen, J. B., Diffraction from Materials, 2nd. ed., Springer-Verlag Berlin, Heidelberg, 1987, p. 377.Google Scholar
10. Hershberger, J., Kustas, F., Rek, Z. U., Yalisove, S. M., and Bilello, J. C., “Structure Determination of B4C And SiC Thin Films Via Synchrotron High-Resolution Diffraction”, accepted for publication in Thin Films-Stresses and Mechanical Properties. MRS Proc. Fall 1997.Google Scholar