Hostname: page-component-586b7cd67f-t7fkt Total loading time: 0 Render date: 2024-11-25T17:31:26.783Z Has data issue: false hasContentIssue false

Defect Formation by Ion Implantation in Cz-Si Studied by a Monoenergetic Positron Beam

Published online by Cambridge University Press:  26 February 2011

A. Uedono
Affiliation:
Department of Industrial Chemistry, Faculty of Engineering, University of Tokyo, 7–3–1 Hongo, Bunkyo-ku, Tokyo 113, Japan
Y. Ujihira
Affiliation:
Department of Industrial Chemistry, Faculty of Engineering, University of Tokyo, 7–3–1 Hongo, Bunkyo-ku, Tokyo 113, Japan
L. Wei
Affiliation:
Institute of Materials Science, University of Tsukuba, Tsukuba, Ibaraki 305, Japan
Y. Tabuki
Affiliation:
Institute of Materials Science, University of Tsukuba, Tsukuba, Ibaraki 305, Japan
S. Tanigawa
Affiliation:
Institute of Materials Science, University of Tsukuba, Tsukuba, Ibaraki 305, Japan
J. Sugiura
Affiliation:
Device Development Center, Hitachi Ltd. 2326, Imai, Ome-shi, Tokyo 198, Japan
M. Ogasawara
Affiliation:
Device Development Center, Hitachi Ltd. 2326, Imai, Ome-shi, Tokyo 198, Japan
M. Tamura
Affiliation:
Central Research Laboratory, Hitachi Ltd. 1–280, Kokubunji 185, Japan
Get access

Abstract

Vacancy-type defects in ion implanted Si were studied by a monoenergetic positron beam. The depth-distributions of the defects were obtained from measurements of Doppler broadening profiles of the positron annihilation as a function of incident positron energy. The results showed that a size of vacany-clusters introduced by 150-keV P+-ion implantation was found to be smaller than that introduced by 2-MeV P+-ion implantation. This was attributed to an overlap of collision cascades in low-energy (150 keV) ion implanted specimens. From isochronal annealing experiments for 80-keV B+- and 150-keV P+-ion implanted specimens, the defected region was removed by 1200 °C annealing, however, for 2-MeV P+-implanted specimen, two-types of oxygen-vacancy complexes were found to coexist even after 1200 °C annealing.

Type
Research Article
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Tamura, M., Materials Science Reports, 6, 141 (1991).CrossRefGoogle Scholar
2. Schultz, P. J. and Lynn, K. G., Rev. Mod. Phys., 60, 701 (1988).CrossRefGoogle Scholar
3. Uedono, A., Wei, L., Dosho, C., Kondo, H., Tanigawa, S. and Tamura, M., Jpn. J. Appl. Phys., 30, 1597 (1991).CrossRefGoogle Scholar
4. Valkealahti, S. and Nieminen, R. M., Appl. Phys. A, 35, 51 (1984).CrossRefGoogle Scholar
5. Vehanen, A., Saarinen, K., Hautojärvi, P. and Huomo, H., Phys. Rev. B, 25, 4606 (1987).CrossRefGoogle Scholar
6. Morehead, F. F., Crowder, B. L. and Title, R. S., J. Appl. Phys., 43, 1112 (1972).CrossRefGoogle Scholar
7. Keinonen, J., Hautala, M., Rauhala, E., Karttunen, V., Räisänen, A., Lahtinen, J., Vehanen, A., Punkká, E. and Hautojärvi, P., Phys. Rev. B, 21, 8269 (1988).CrossRefGoogle Scholar
8. Dannefaer, S., Fruensgaard, N., Kupca, S., Hogg, B. and Kerr, D., Can. J. Phys., 61, 451 (1983).CrossRefGoogle Scholar
9. Uedono, A., Tanigawa, S., Sugiura, J. and Ogasawara, M., Jpn. J. Appl. Phys., 28, 1293 (1989).CrossRefGoogle Scholar
10. Rupprecht, H. S., J. Vac. Sci. Technol., 15, 1669 (1978).CrossRefGoogle Scholar
11. Dannefaer, S. and Kerr, D., J. Appl. Phys., 60, 1313 (1986).CrossRefGoogle Scholar
12. Corbett, J. W., Karins, J. P. and Tan, T. Y., Nucl. Inst. & Methods, 182/183, 457 (1981).CrossRefGoogle Scholar
13. Tamura, M., Natsuaki, N., Wada, Y. and Mitani, E., Nucl. Instrum. & Methods B, 21, 438 (1987).CrossRefGoogle Scholar