Hostname: page-component-78c5997874-8bhkd Total loading time: 0 Render date: 2024-11-19T05:38:25.776Z Has data issue: false hasContentIssue false
  • English
  • Français

Θ CuAl2 Precipitate Coarsening in Al-2% Cu Thin Films

Published online by Cambridge University Press:  26 July 2012

John E. Sanchez Jr. ,
L. T. McKnelly  and
J. W. Morris Jr.
John E. Sanchez Jr.
Affiliation:
Max-Planck Institute Für Metallforschung, Seesstrasse 92, D-7000 Stuttgart 1, Germany
L. T. McKnelly
Affiliation:
Vitesse Semiconductor, Camarillo, CA 93010
J. W. Morris Jr.
Affiliation:
Department of Materials Science and Mineral Engineering, University of California, and Center For Advanced Materials, Lawrence Berkeley Laboratory, Berkeley, CA 94720
Get access

Abstract

Θ phase CuAl2 precipitate size evolution during coarsening at 310°C in 0.5 μm thick Al-2% (wt) Cu thin films was characterized by transmission electron microscopy. Films were sputter deposited onto oxidized Si substrates by standard techniques. The coarsening process preferred the growth of blocky Θ morphologies at Al triple points. Coarsening was via solute Cu diffusion along Al grain boundaries during annealing. The average Θ size dependence on annealing time (t) is approximately (t)1/4 in general agreement with models for particle coarsening along grain boundaries. Concurrent Al grain growth was shown to initially enhance the Θ coarsening rate above (t)1/4 behavior. This boundary coarsening process leads to a grain size dependence of the coarsening rate which has been observed in related and other previous work in thin films. These results are shown to be relevant for effects produced during accelerated electromigration testing, such as previous ‘curious’ 0 morphologies at triple points observed by others, the enhanced flux of Cu during testing, and possible mechanisms affecting electromigration failure processes.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 230: Symposium R – Phase Transformation Kinetics in Thin Films , 1991 , 67
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. D'Heurle, F. M., Met. Trans. 2, 683–689 (1971).Google Scholar
2. Frear, D.R., Sanchez, J.E. Jr., Romig, A.D., Morris, J.W. Jr., Met. Trans. 21A, 2449–2458 (1990).Google Scholar
3. Mader, S., Herd, S., Thin Solid Films, 10, 377–389 (1972).Google Scholar
4. Agarwala, B.N., Patnaik, B., Schnitzel, R., J. Appl. Phys., 43 (4), 1487–1493 (1972).Google Scholar
5. Abraham, T., J. Electrochemcal Soc., 135 (11), 2809–2814 (1987).Google Scholar
6. Frost, H.J., Thompson, C.V., Howe, C.L., Whang, J., Scripta Met., 22, 65 (1988).Google Scholar
7. Mullins, W. W., J. Appl. Phys., 59, 1341 (1986).Google Scholar
8. Frost, H.J., Thompson, C. V., J. Electr. Mater., 17, 447 (1988).Google Scholar
9. Tweed, C.J., Ralph, B., Hansen, N., Acta Metallurgica, 32, 1407–1414 (1984).Google Scholar
10. Aaron, H.B., Aaronson, H. I., Acta Metallurgica, 16, 789–798 (1968).Google Scholar
11. Speight, M.V., Acta Metallurgica, 16, 133–135 (1968).Google Scholar
12. Attardo, M. J., Rosenberg, R., J. Appl. Phys. 41 (#6), 2381–2386 (1970).Google Scholar
13. Porter, D.A., Easterling, K.E., “Phase Transformations in Metals and Alloys”, Van Nostrand, Berkshire, UK, (1981).Google Scholar
14. Learn, A.J., J. Elect. Mat'ls. 3 (4), 531–552 (1974).Google Scholar
15. Sanchez, J.E. Jr., to be published.Google Scholar
16. Agarwala, B.N., Digiacomo, G., Joseph, R.R., Thin Solid Films, 34, 165–169 (1976).Google Scholar
17. Sanchez, J.E. Jr., McKnelly, L.T., Morris, J.W. Jr., J. Electr. Mater., 19, 1213–1220 (1990).Google Scholar
18. Lobotka, P., Vavra, I., phys. stat. sol. (a), 63, 655–661 (1981).Google Scholar