Hostname: page-component-586b7cd67f-2brh9 Total loading time: 0 Render date: 2024-11-29T07:44:22.218Z Has data issue: false hasContentIssue false
  • English
  • Français

Cross-sectional TEM and corrosion studies of Al and N implanted copper

Published online by Cambridge University Press:  25 February 2011

E. Gerritsen ,
H. J. Ligthart  and
T. E. G. Deenen
E. Gerritsen
Affiliation:
Philips Research Labs., P.O. Box 80.000, 5600 JA EINDHOVEN, The Netherlands.
H. J. Ligthart
Affiliation:
Philips Research Labs., P.O. Box 80.000, 5600 JA EINDHOVEN, The Netherlands.
T. E. G. Deenen
Affiliation:
Philips Research Labs., P.O. Box 80.000, 5600 JA EINDHOVEN, The Netherlands.
Get access

Abstract

Poly- and single crystalline copper was implanted with aluminium and nitrogen at doses ranging from 1016 to 5 × 1017 at/cm2 and energies of 170 keV. The corrosion resistance of the implanted surfaces was tested by exposure to an H25-containing atmosphere. The amount of copper sulphide formed was measured by chrono potentiometric reduction. The amount of corrosion products was markedly reduced (up to a factor 50) by high dose implantations of aluminium. The microstructure of the implanted copper was examined by Transmission Electron Microscopy of cross-sectioned specimens. A deep damage layer far exceeding the ion range was observed. XTEM-pictures of aluminium implanted copper single crystals of various orientations suggest a channeling mechanism for this deep damage layer. In situ annealing of the specimens in the TEM showed that most of the implantation damage is removed at 600°C except for an array of dislocations at the end of the damage range.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 93: Symposium C – Materials Modification and Growth Using Ion Beams , 1987 , 329
Copyright
Copyright © Materials Research Society 1987

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Crowder, B.L., Tan, S.l., IBM Tech.Discl. Bull 14(1971) 198.Google Scholar
2. Ratcliffe, P.J., Collins, R.A., Phys. Stat. Sol A78(1983) 547.Google Scholar
3. Narsyan, J., Den, O.S., Noggle, T.S., J.Nucl.Mat. 71(1977) 160.Google Scholar
4. Ligthart, H.J., Gerritsen, E., Kerkhoff, P.J. v.d., Hoekstra, S., Leest, R.E. v.d., Keetels, E., Nucl.Instr.Meth.Phys. Res. B19/20(1987) 209.Google Scholar
5. Gemmel, D.S., Rev. Mod. Phys. 46(1974) 129.Google Scholar
6. Hvelplund, P., Fastrup, B., Phys.Rev. 165(1968) 408.Google Scholar
7. Spooner, S., Legg, K.O. in Ion implantation metallurgy Pierce, C.M., Hirvonen, J.K., ed. 1974.Google Scholar
8. Leest, B. R.E. v.d., Werkstoffe und Korrosion 37(1986) 629.Google Scholar
9. Prabhawalkar, P.D., Kothari, D.C., Nair, M.R., Raole, P.M., Nucl.Inst.Meth. Phys. Res. B 7/8(1985) 147.Google Scholar
10. Gerritsen, E., Vos, H. to be published.Google Scholar