Hostname: page-component-78c5997874-94fs2 Total loading time: 0 Render date: 2024-11-15T15:59:37.994Z Has data issue: false hasContentIssue false
  • English
  • Français

Creep of Mechanically-Alloyed NiAl Containing 13 Vol % Mo or Mo2C Dispersoids

Published online by Cambridge University Press:  10 February 2011

A. Lakki  and
D. C. Dunand
A. Lakki
Affiliation:
Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139, USA presently at: Max-Planck-Institut fur Metallforschung, Seestrasse 92, D-70174 Stuttgart, Germany, [email protected]
D. C. Dunand
Affiliation:
presently at: Department of Materials Science and Engineering, Northwestern University, Evanston, IL 60208, USA, [email protected].
Get access

Abstract

Dispersion-strengthened nickel aluminide NiAl was synthesized by reactive mechanical alloying from elemental powders. The microstructure and creep properties of these materials was compared for two cases: (i) NiAl-Mo, where dispersoids are in the form of a ductile, metallic phase and (ii) NiAl- Mo2C, where the dispersoids are a brittle, ceramic phase. Also, the effect of annealing treatments which coarsened both matrix grains and dispersoids was investigated. Inhibited diffusional creep is identified as the rate-controlling creep mechanism.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 552: Symposium KK – High-Temperature Ordered Intermetallic Alloys VIII , 1998 , KK9.2.1
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Noebe, R. D., Bowman, R. R., and Nathal, M. V.,, Inter. Mater. Rev., 38, 193 (1993).Google Scholar
2. Grahle, P., Arzt, E., Acta. Mater., 45, 201 (1997).CrossRefGoogle Scholar
3. Arzt, E. and Grahle, P., Acta. Mater., 46, 2717 (1998).Google Scholar
4. Takahashi, T. and Dunand, D. C., Mater, Sci. Eng. A, 192/193, 186 and 195 (1995).Google Scholar
5. Lakki, A. and Dunand, D. C., manuscript in preparation.Google Scholar
6. Ashby, M. F. and Ebeling, R., Trans. Met. Soc. AIME, 236, 1396 (1966).Google Scholar
7. Zener, C., cited by Smith, C.S., Trans. AIME 175, 15 (1949).Google Scholar
8. Raj, S.V. and Farmer, S. C., Metall. Mater. Trans. A, 26, 343 (1995).Google Scholar
9. Arzt, E., Ashby, M. F. and Verrall, R.A., Acta Metall., 31, 1977 (1983).CrossRefGoogle Scholar
10. Rösler, J., Joos, R. and Arzt, E., Trans. A, 23A, 1521 (1992).Google Scholar
11. McLean, M., Acta Metall., 33, 545 (1985).Google Scholar