Hostname: page-component-78c5997874-ndw9j Total loading time: 0 Render date: 2024-11-19T06:38:38.835Z Has data issue: false hasContentIssue false
  • English
  • Français

The Corrosion Resistance of Alloys to Salt Brine Attack

Published online by Cambridge University Press:  25 February 2011

V. Mirschinka  and
R. Odoj
V. Mirschinka
Affiliation:
Institute for Chemical Technology Nuclear Research Centre (KFA)5170 Jülich, FRG
R. Odoj
Affiliation:
Institute for Chemical Technology Nuclear Research Centre (KFA)5170 Jülich, FRG
Get access

Abstract

Six metal alloys were subjected to surface and creeprupture stress corrosion tests using NaCl- and Q-brines. Low-allou materials do not seem to be suitable as a barrier against salt brine attack due to the high surface corrosion rate. Creep-rupture strength corrosion was insignificant for the tested materials. Hastelloy C 4 showed no corrosion attack by salt brines in autoclaves at 200°C and 100 bar during 8 months of testing. Bentonite was shown to reduce the corrosion attack considerably.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 26: Symposium D – Scientific Basis for Nuclear Waste Management VII , 1983 , 25
Copyright
Copyright © Materials Research Society 1984

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Mirschinka, V.,,et al Proc. Mat. Res. Soc., Vol. 15, Scientific Basis for Nuclear Waste Management VI, D.G. Brookins, ed. (North-Holland, New York 1983) pp. 695–702.Google Scholar
2. Holdoway, K.E., Fourth Symposium on Salt, Vol. 1, (The Northern Ohio Geological Society, Cleveland 1974) pp. 303–312.Google Scholar
3. Mirschinka, V., Doctoral Thesis, Technical University of Aachen. KFA-Report, Jül-Spez-226 (1983).Google Scholar