Hostname: page-component-586b7cd67f-rdxmf Total loading time: 0 Render date: 2024-11-23T15:12:56.499Z Has data issue: false hasContentIssue false
  • English
  • Français

Control of Microstructure Driven by Magnetic Field in Ferromagnetic Intermetallics

Published online by Cambridge University Press:  26 February 2011

Tomoyuki Kakeshita  and
Takashi Fukuda
Tomoyuki Kakeshita
Affiliation:
[email protected], Osaka University, Graduate School of Enginneering, 2-1, Yamadaoka, Suita, 565-0871, Japan, +81-6-6879-7482, +81-6-6879-7485
Takashi Fukuda
Affiliation:
[email protected], Osaka University, Department of Materials Science and Engineering, Graduate School of Engineering, 2-1, Yamadaoka, Suita, 565-0871, Japan
Get access

Abstract

Magnetic field has been known to be effective in solidification processes. Recently, however, it has been revealed that the magnetic field is also effective for controlling the arrangement of variants, which are formed in association with a solid-solid transformation, in some ferromagnetic intermetallic-based alloys with a large magnetocrystalline anisotropy. In this presentation, we will show two of such cases: one is the rearrangement of martensite variants by magnetic field in intermetallic-based ferromagnetic shape memory alloys (Ni2MnGa and Fe3Pt), and the other is formation of mono-variant state by ordering heat-treatment under magnetic field in a L10-type CoPt. The former process is diffusionless and proceeds by the movement of twinning plane under a magnetic field. The latter is a diffusion controlled process. For both the cases, a large magnetocrystalline anisotropy is essentially important for controlling the arrangement of variants, although kinetics of the two processes is quite different each other.

Keywords

magnetic propertiesmicrostructurephase transformation
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 980: Symposium II – Advanced Intermetallic-Based Alloys , 2006 , 0980-II03-02
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Kakeshita, T., Kuroiwa, K., Shimizu, K., Ikeda, T., Yamagishi, A. and Date, M., Mater. Trans. JIM 34, 415 (1993).Google Scholar
2. Kakeshita, T., Saburi, T., Kindo, K. and Endo, S., Phase Transitions 70, 65 (1999).Google Scholar
3. Fukuda, T., Sakamoto, T., Kakeshita, T., Takeuchi, T. and Kishio, K., Mater. Trans. 45, 188 (2004).Google Scholar
4. Sakamoto, T., Fukuda, T., Kakeshita, T., Takeuchi, T. and Kishio, K., Science and Technology of Advanced Materials 5, 35 (2004).Google Scholar
5. Okamoto, N., Fukuda, T., Kakeshita, T., Takeuchi, T. and Kishio, K., Science and Technology of Advanced Materials 5, 29 (2004).Google Scholar
6. Straka, L. and Heczko, O., J. Appl. Phys. 93, 8636 (2003).Google Scholar
7. Shima, H., Oikawa, K., Fujita, A., Fukamichi, K., Ishida, K., Nakamura, S., Nojima, T., J. Mag. Mag. Mater. 290–291, 566 (2005).Google Scholar
8. Kakeshita, T. and Fukuda, T., Science and Technology of Advanced Materials 7, 350 (2006).Google Scholar
9. Tanaka, K., Ichitsubo, T., Koiwa, M., Materials Sci. Eng. A312, 118 (2001).Google Scholar