Hostname: page-component-586b7cd67f-dsjbd Total loading time: 0 Render date: 2024-11-29T09:18:08.670Z Has data issue: false hasContentIssue false
  • English
  • Français

Composition Effects on Viscosity and Chemical Durability of Simulated Plutonium Residue Glasses

Published online by Cambridge University Press:  03 September 2012

S. A. Bulkley  and
J. D. Vienna
S. A. Bulkley
Affiliation:
New York State College of Ceramics, Alfred University, Alfred, New York 14802
J. D. Vienna
Affiliation:
Pacific Northwest National Laboratory, Richland, Washington 99352
Get access

Abstract

Vitrification is currently being explored as an option for plutonium (Pu) scrap and residue stabilization because of its ability to convert plutonium-bearing materials into a safe, durable, and accountable waste form with reduced need for safeguarding. To develop this glass, the effect of composition on key glass properties (viscosity and chemical durability) were measured. A one-component-at-a-time change test matrix with 36 glasses was designed. The viscosity is reported as the temperature at 5 Pas (T5), and the durability as the normalized release of boron and sodium (Гb and ГNa) from MCC-1 and PCT static leach tests and the negative logarithm of fractional aluminum and lithium release (-ln[fA1] and -ln[fLi]) from TCLP. The effects of Al2O3, B2O3, CaO, CeO2, Gd2O3, K2O, Li2O, MgO, Na2O, PbO, SiO2, SnO, TiO2, and ZrO2 were found to be linear for T5 and non-linear for chemical durability. T5 is increased most by the addition of SiO2 followed by Al2O3, and decreased most by Li2O followed by Na2O. MCC-1 ln[rB] and ln [rNa] are increased most by the addition of Li2O followed by MgO and decreased most by Al2O3 followed by ZrO2. PCT In[rB] and In[rNa] are increased most by the addition of MgO followed by B2O3 and decreased most by Al2O3 followed by SiO2. The relative effect of components on rB and rNa are similar for both PCT and MCC-1. TCLP -ln[fAl] and ln[fLi are increased most by the addition of SiO2 followed by SnO and decreased most by Li2O.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 465: Symposium II – Scienfific Basis for Nuclear Waste Management XX , 1996 , 1243
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Kormányos, K. R., Marra, J. C., and Overcamp, T. J., “Vitrification of Simulated Radioactive Rocky Flats Plutonium Containing Waste Ash with a Stir-Melter System”, in Ceram. Trans, in press (1997).Google Scholar
2. Lutze, W. J. and Ewing, R. C., Radioactive Waste Forms for the Future, North-Holland Publishing, New York, NY (1988).Google Scholar
3. Forsberg, C. W.. What Is Plutonium Stabilization, and What Is Safe Storage of Plutonium?, ORNL/M-4322, Oak Ridge National Laboratory, Oak Ridge, TN (1995).10.2172/114031Google Scholar
4. Memorandum, , McCallum, Edward J., Director, Office of Safeguards and Security, US Department of Energy, Subject: Additional Attractiveness Level E Criteria for Special Nuclear Materials (SNM), July 22, 1996.Google Scholar
5. Hrma, P., Piepel, G. F., Schweiger, M. J., Smith, D. E., Kim, D. S., Redgate, P. E., Vienna, J. D., LoPresti, P. E., Simpson, D. B., Peeler, D. K., and Langowski, M. H., Property / Composition Relationships for Hanford High-Level Waste Glasses Melting at 1150 °C, PNL-10359, vol. 1 and 2, Pacific Northwest National Laboratory, Richland, WA (1994).Google Scholar
6. Vienna, J. D., Hrma, P., Schweiger, M. J., and Langowski, M. H., “Compositional Dependence of Elemental Release from HLW Glasses by the Product Consistency Test: a One Component-at-a-Time Study,” in Ceram. Trans., in press (1997).Google Scholar
7. Vienna, J. D., Hrma, P., Kim, D. S., Schweiger, M. J., and Smith, D. E., “Compositional Dependence of Viscosity, Electrical Conductivity, and Liquidus Temperature of Multicomponent Borosilicate Waste Glass”, in Ceram. Trans, in press (1997).Google Scholar
8. Feng, X. D., Pegg, I. L., Barkatt, A., Mecedo, P. B., Cucinell, S. J., and Lai, S., “Correlation Between Composition Effects on Glass Durability and the Structural Role of the Constituent Oxides”, Nuclear Technology, vol. 85, 334–45 (1989).10.13182/NT89-A34255Google Scholar
9. Li, H., Langowski, M. H., Hrma, P., Schweiger, M. J., Vienna, J. D., and Smith, D. E., Minor Component Study for Simulated High-Level Nuclear Waste Glasses, PNNL-10996, Pacific Northwest National Laboratory, Richland, WA (1995).Google Scholar
10. Cunnane, J. C., High-Level Waste Borosilicate Glass: A Compendium of Corrosion Characteristics, DOE-EM-0177, U.S. DOE, Office of Waste Management, Washington, D.C. (1994).Google Scholar
11. Kim, D. S., Hrma, P., Palmer, S. E., Smith, D. E., and Schweiger, M. J., “Effect of B2O3, CaO, and Al2O3 on the Chemical Durability of Silicate Glasses for Hanford Low-Level Waste Immobilization”, Ceram. Trans., vol. 61, 531–8 (1995).Google Scholar
12. Li, H., Darab, J. G., Smith, P. A., Feng, X. D., and Peeler, D. K., “Chemical Durability of Low-Level Simulated Nuclear Waste Glasses with High-Concentrations of Minor Components”, in Nuclear Materials Management, vol. XXIV, INMM, Palm Desert, CA (1995).Google Scholar
13. Bunker, B. C., “Waste Glass Leaching: Chemistry and Kinetics”, in Scientific Basis for Nuclear Waste Management X, Materials Research Society, Pittsburgh, PA (1987).Google Scholar
14. Clark, D. E. and Zoitos, B. Z., Corrosion of Glass. Ceramics, and Ceramic Superconductors, Noyes Publications, Park Ridge, NJ (1992).Google Scholar
15. Resce, J. L., Overcamp, T. J., Cicero, C. A., and Bickford, D. F., The Effect of Compositional Parameters on the TCLP and PCT Durability of Environmental Glasses, WSRC-MS-95–0294, Westinghouse Savannah River Co., Aiken, SC (1995).Google Scholar