Hostname: page-component-78c5997874-lj6df Total loading time: 0 Render date: 2024-11-03T03:34:53.649Z Has data issue: false hasContentIssue false

Composition Dependence of Phase Separation and Crystallization in Deeply Undercooled Zr-(Ti-)Cu-Ni-Al Alloys

Published online by Cambridge University Press:  17 March 2011

Andreas A. Kündig
Affiliation:
W. M. Keck Laboratory, California Institute of Technology, Pasadena, California 91125, U.S.A. Institut für Metallforschung, ETH Zürich, CH-8092 Zürich, Switzerland
Jörg F. Löffler
Affiliation:
W. M. Keck Laboratory, California Institute of Technology, Pasadena, California 91125, U.S.A.
William L. Johnson
Affiliation:
W. M. Keck Laboratory, California Institute of Technology, Pasadena, California 91125, U.S.A.
Get access

Abstract

Different bulk glass forming alloys in the neighborhood of Zr52.5Cu17.9Ni14.6Al10Ti5 (Vit105) have been investigated by differential scanning calorimetry (DSC), x-ray diffraction (XRD) and small-angle neutron scattering (SANS). Along the Ti/Al line in composition space, Zr52.5Cu17.9Ni14.6Al10−xTi5+x with – ≤ x ≤ +2.5, the glass transition temperature, Tg, and the undercooled liquid regime (the difference between the first crystallization temperature and the glass transition temperature) continually decrease with increasing x. SANS measurements of annealed alloys show interference maxima, giving evidence for decomposition on the nanometer scale, up to a critical temperature Tc. In contrast to Tg, Tc increases with x and thus intercepts with Tg in the range –2.5 ≤ x ≤ –1.25, depending on the time scale of the experiment. At this composi- tion, significant changes in DSC traces and XRD patterns are observed. Additional isothermal DSC experiments show that the onset times for crystallization are significantly different for temperatures below and above Tc. We conclude that Tc, respectively the relation between Tc and Tg, determines the crystallization behavior and the thermal stability of these bulk metallic glasses.

Type
Research Article
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Inoue, A., Zhang, T., and Masumoto, T., Mater. Trans., JIM, 31, 177 (1990).Google Scholar
2. Xing, L. Q., Ochin, P., Harmelin, M., Faudot, F., Bigot, J., Chevalier, J. P., Mat. Sci. Eng., A220, 155 (1996).Google Scholar
3. Lin, X. H., Johnson, W. L., and Rhim, W. K., Mater. Trans. JIM, 38, 473 (1997).Google Scholar
4. Xing, L. Q., Gu, X., Lusby, T. A., Melmed, A. J. and Hufnagel, T. C., Mater. Res. Soc. Symp. Proc., 580, 381 (2000).Google Scholar
5. Wang, J. G., Choi, B. W., Nieh, T. G., and Liu, C. T., J. Mater. Res., 15, 798 (2000).Google Scholar
6. Löffler, J. F., Bossuyt, S., Glade, S. C., Johnson, W. L., Wagner, W., and Thiyagarajan, P., Appl. Phys. Lett., 77, 525 (2000).Google Scholar
7. Inoue, A., Shibata, T. and Zhang, T., Mater. Trans., JIM, 36, 1420 (1995).Google Scholar