Hostname: page-component-586b7cd67f-dlnhk Total loading time: 0 Render date: 2024-11-27T10:29:16.239Z Has data issue: false hasContentIssue false
  • English
  • Français

Composition Changes and Future Challenges for the Sellafield Waste Vitrification Plant

Published online by Cambridge University Press:  15 February 2011

A. Riley ,
S. Walker  and
Nick R. Gribble
A. Riley
Affiliation:
Sellafield Ltd, Sellafield, Seascale, Cumbria, CA20 1PG, Cumbria, UK
S. Walker
Affiliation:
Sellafield Ltd, Sellafield, Seascale, Cumbria, CA20 1PG, Cumbria, UK
Nick R. Gribble
Affiliation:
National Nuclear Laboratory, Sellafield, Seascale, Cumbria, CA20 1PG, Cumbria, UK
Get access

Abstract

The Sellafield Waste Vitrification Plant (WVP) immobilises highly active liquors produced during reprocessing of spent nuclear fuel by bonding the fission products as metal oxides into a borosilicate glass matrix. This provides a stable and durable waste form suitable for safe long term storage and ultimate disposal.

WVP was commissioned with feed from reprocessing of Magnox reactor fuel. This material is relatively low in fission product content per tonne of fuel, but contains significant Al and Mg from fuel cladding. WVP also routinely treats a blended feed made from a mixture of Magnox and Oxide reprocessing products. The Oxide fuel from Light Water Reactor (LWR) and Advanced Gas Cooled (AGR) power stations is of higher burnup and contains more fission products per tonne of fuel, also Gd and other process additives. Blending allows 25% incorporation of waste oxides by weight in glass to be achieved routinely.

Recent programmes of development work in WVP have been aimed at increasing incorporation rates for these feeds, to reduce the number of waste containers produced for disposal. Work has also focussed on increasing the throughput of WVP, to more rapidly treat current stocks of liquid reprocessing waste, both by increasing the feed rate and by improving the lifetime of key components to improve plant availability.

Future challenges for WVP include flowsheet changes to treat historic stocks of reprocessing wastes containing high U, Fe and Cr. Washout of solids from the base of waste storage tanks in preparation for decommissioning is also likely to give high Mo feeds. Development of flowsheet and glass formulation to accept these changes in feed composition will be a key objective of future work.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1193: Scientific Basis for Nuclear Waste Management XXXIII , 2009 , 267
Copyright
Copyright © Materials Research Society 2009

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Donald, I.W., Metcalfe, B.L., Taylor, R.N.J, “The Immobilization of High Level Radioactive Wastes Using Ceramics and Glasses”, J. Mat. Sci, 32, 1997, 5851–5887 Google Scholar
2 Bradshaw, K., Gribble, N.R., Mayhew, P.A., Talford, M.C., Riley, A.D., “Full Scale Non-Radioactive Vitrification Development in Support of UK Highly Active Waste Vitrification”, Proceedings of Waste Management 2006 Conference, Tucson AZ, paper # 6439 Google Scholar
3 Bradshaw, K., Gribble, N. R., Hughes, D. O., Riley, A.D., “UK Full-Scale Non-Active Vitrification Development and Implementation of Research Findings onto the Waste Vitrification Plant”, Proceedings of Waste Management 2007 Conference, Tucson AZ, paper # 7197 Google Scholar
4 Short, R., Gribble, N. R., Riley, A.D., “Widening the Envelope of UK HLW Vitrification – Experimental Studies with High Waste Loadings and New Product Formulations on a Full Scale non-active Vitrification Plan”, Proceedings of Waste Management 2008 Conference, Tucson AZ, paper # 8348 Google Scholar
5 Short, R., Hand, R.J., Hyatt, N.C., Mobus, G., “Environment and Oxidation State of Molybdenum in Simulated High Level Nuclear Waste Glass Compositions”, J. Nuc. Mat. 340, 2005, 179–186 Google Scholar
6 Connelly, A. J., Hyatt, N. C., Travis, K. P., Hand, R. J., Maddrell, E. R., “Structural aspects of uranium in borosilicate glasses”, Proceedings of the 21st International Congress on Glass, July 2007, Strasbourg, France.Google Scholar
7 Dunnett, B., Gribble, N.R., Riley, A.D., Steele, C.J., “Initial investigation into the vitrification, of high molybdenum solids in borosilicate glass”, Proceedings of Materials Research Society Conference 2009, St Petersburg, Russian Federation, paper # GP-1Google Scholar