Hostname: page-component-586b7cd67f-tf8b9 Total loading time: 0 Render date: 2024-11-29T09:26:05.403Z Has data issue: false hasContentIssue false
  • English
  • Français

Compatibility of Potential Reinforcing Ceramics with Ni and Fe Aluminides

Published online by Cambridge University Press:  21 February 2011

J. A. Moser ,
M. Aindow ,
W. A. T. Clark ,
S. Drapert  and
H. L. Fraser
J. A. Moser
Affiliation:
Dept. of Materials Science & Engineering, The Ohio State University, Columbus, OH 43210.
M. Aindow
Affiliation:
Dept. of Materials Science & Engineering, The Ohio State University, Columbus, OH 43210.
W. A. T. Clark
Affiliation:
Dept. of Materials Science & Engineering, The Ohio State University, Columbus, OH 43210.
S. Drapert
Affiliation:
NASA-Lewis Research Center, Cleveland, OH 44135.
H. L. Fraser
Affiliation:
Dept. of Materials Science & Engineering, The Ohio State University, Columbus, OH 43210.
Get access

Abstract

The compatibility of candidate ceramic reinforcement materials with intermetallic matrices for high temperature composite systems has been evaluated. Powders of FeAl and NiAl were mixed with ceramic powders and consolidated by hot isostatic pressing and subsequent heat treatment. The microstructures of these composites and the nature of the ceramic/matrix interfaces were assessed using a wide variety of electron-beam techniques. The system FeAl/TiB2 was found to be particularly promising. The matrix appears to be bonded to the ceramic particles, which may be the result of diffusion of Fe into the ceramic. The particles stabilized in a previously unreported monoclinic crystal structure, rather than the equilibrium hexagonal form exhibited by the binary compound.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 194: Symposium R – Intermetallic Matrix Composites I , 1990 , 379
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Cathcart, J. V. in High Temperature Ordered Intermetallic Alloys, edited by Koch, C.C., Liu, C. T. and Stoloff, N. S. (Mater. Res. Soc. Proc. 32, Pittsburgh, PA 1985) pp. 445–59.Google Scholar
[2] Vedula, K. and Stephens, J.R. in High Temperature Ordered Intermetallic Alloys II, edited by Stoloff, N. S., C.Koch, C., Liu, C. T. and Izumi, O. (Mater. Res. Soc. Proc. 81, Pittsburgh, PA 1987) pp. 381–91.Google Scholar
[3] Misra, A. J.. NASA CR-4171, 1988.Google Scholar
[4] Misra, A. J., NASA CR-4172, 1988.Google Scholar
[5] J., Misra, A., in Interfaces in Metal-Ceramic Comoosites, edited by Lin, R. Y., Arenault, R. J., Martins, G. P. and Fishman, S. G. (Minerals, Metals & Materials Soc. Warrendale, PA 1990) pp.85–102.Google Scholar
[6] Ayer, R., J. El. Micros. Technique 13, 16–26 (1989).Google Scholar
[7] Gjønnes, J. and Moodie, A.F., Acta Cryst., 19, 65–67 (1965).Google Scholar
[8] Eaglesham, D. J., Maher, D. M., Fraser, H. L., Humphreys, C. J. and Bean, J. C., Appl. Phys. Lett. 54, 222–24 (1989).Google Scholar
[9] Kang, E. S., Jang, C.J., Lee, C.H., Kim, C.H. and Kim, D.K., J. Am. Ceram. Soc., 22 (10), 1868–72 (1989).Google Scholar
[10] Aindow, M., Moser, J., Clark, W.A.T. and Fraser, H.L. (in preparation).Google Scholar