Hostname: page-component-586b7cd67f-g8jcs Total loading time: 0 Render date: 2024-11-25T15:21:53.506Z Has data issue: false hasContentIssue false
  • English
  • Français

Comparison with Amino Group and Hydrophilic Group for Protein Afftnity by Excimer Laser Induced Functional Groups Substitution Onto Pet Film

Published online by Cambridge University Press:  11 February 2011

Hitoshi Omuro ,
Masato Nakagawa ,
Hiroaki Fukuda  and
Masataka Murahara
Hitoshi Omuro
Affiliation:
Department of Electrical Engineering, Tokai University, 1117 Kitakaname, Hiratuka-shi, Kanagawa 259-1292, Japan
Masato Nakagawa
Affiliation:
Mzue Clinic, 3-6-95 Nisimizue, Edogawa, Tokyo 132-0015, Japan
Hiroaki Fukuda
Affiliation:
Saiseikai Hiratuka Hospital, 37-1 Tatino, Hiratuka, Kanagawa 254, Japan
Masataka Murahara
Affiliation:
Department of Electrical Engineering, Tokai University, 1117 Kitakaname, Hiratuka-shi, Kanagawa 259-1292, Japan
Get access

Abstract

PET has been widely used for medical materials such as an artificial ligament. However, the affinity of tissues is no good. To compensate this, the mesh formed PET has clinically been used for artificial ligament intruding tissue into mesh. However, this method has not shown sufficient affinity with the tissue; that is, the initial adapting strength of the material and tissue is weak. · The artificial ligament must be biocompatible to contact blood and tissue. The foregoing artificial ligament, however, doesn't satisfy the biocompatibility. ·

Thus, we have modified the PET surface into hydrophilic by substituting NH2 or OH functional groups. Firstly, an ArF excimer laser light was irradiated the PET with water on top. The OH functional group was substituted on the PET surface by this photochemical reaction. Secondly, the ArF excimer laser light was irradiated the PET in ammonia gas ambient. In this photochemical reaction, the NH2 functional group was substituted on the PET surface.

· In this study, the untreated sample had the contact angle with water of 80 degrees and the bonding strength with protein of only 1.0kg/cm2. The contact angle of the modified sample improved to 40 degrees and the bonding strength, to 23kg/cm2. When treated in ammonia gas, the contact angle also improved to 40 degrees; however, the bonding strength was almost the same as that of the untreated sample.

It was confirmed that the affinity of the PET for water and protein could be controlled by increasing or decreasing the substitution concentration of OH and NH2 functional groups on the surface.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 735: Symposium C – Bioinspired Nanoscale Hybrid Systems , 2002 , C11.18
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Collins. H.R: U.S.experience with Gore-Tex reconstruction of the anterior cruciate ligament, ibid., pp. 156–164 (1988).Google Scholar
2. Roth, J.H and Kennedy, J.C: Polypropylene-braid-augmented anterior cruciate ligament reconstruction, ibid. pp. 79–88.Google Scholar
3. Fujikawa, K.: Clinical study of anterior cruciate ligament reconstruction with the Leeds-Keio artificial ligament. In: Prosthetic Ligament Reconstruction of the Knee (Ed. by Friedman, M.J and Ferkel, R.D), pp. 132–139 (1988), W.B. Saunders, Philadelphia.Google Scholar
4. Ueda-Yukoshi, Tomoko and Matsuda, Takehisa: “Cellular responses on a wettability gradient surface with continuous variation in surface compositions of carbonate and hydroxyl groups”, Langmuir. Vol. 11, No. 10 (1995).Google Scholar
5. Hino, T and Okamura, S: A study on collagen-plastic composites as biomaterials. In: Biocompatibility of Tissue Analogs (Williams, David F.), p. 71–87, CRC Press. Inc., USA (1985).Google Scholar
6. Okoshi, M., Murahara, M. and Toyoda, K.: “Selective Surface Modification of a Fluorocarbon Resin Using Excimer Laser”, M.R.S. Symp. Proc. Vol. 158, 33 (1990).Google Scholar
7. Okoshi, M., Murahara, M. and Toyoda, K.: “Selective Surface Modification of Fluorocarbon Resin into Hydrophilic Material Using an Excimer Laser”, M.R.S. Symp. Proc. Vol. 201, 451 (1991).Google Scholar
8. Ikegame, T. and Murahara, M.: “Fluorination of Polyimide Sheet Surface by Using Xe2* Excimer Lamp and CF4 ”, M.R.S. Symp. Proc. Vol. 98, 23 (1998).Google Scholar
9. Okoshi, M., Inoue, Y., Toyoda, K. and Murahara, M.: “Surface Modification of Fluorocarbon-Resin into Hydrophilic Property for Bacteriologic Cultivation”, The Review of Laser Engineering, Vol. 24, No. 11, November (1996), pp. 1234–1238.Google Scholar
10. Omuro, H., Hamada, K., Nakagawa, T., Sinpuku, E., Nakagawa, M., Fukuda, H. and Murahara, M.: “Uv Laser Induced Amino Group Substitution on PET Ligament to Promote Inhibition of Collagen”, M.R.S. Symp. Proc. Vol. 711, 85–90 (2002)Google Scholar