Hostname: page-component-cd9895bd7-q99xh Total loading time: 0 Render date: 2024-12-27T02:42:22.481Z Has data issue: false hasContentIssue false
  • English
  • Français

Commercialization Status of Ni3Al-Based Alloys

Published online by Cambridge University Press:  15 February 2011

V. K. Sikka
V. K. Sikka*
Affiliation:
Metals and Ceramics Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831–6083, [email protected]
Get access

Abstract

The Ni3Al-based alloys have been under development at the Oak Ridge National Laboratory (ORNL) and other research institutions in the United States and around the world for the last ten years. The incremental developments of composition, melting process, casting methods, property data, corrosion data, weldability development, and prototype component testing under production-like operating conditions have pushed the ORNL-developed Ni3Al-based alloys closer to commercialization. This paper will present the highlights of incremental technical developments along with the approach and current status of commercialization. It is concluded that cast components are the primary applications of Ni3Al-based alloys, and applications range from heat-treating fixtures to forging dies. It is also concluded that the commercialization process is accelerated when technology is licensed to an organization that can produce the alloy, has component manufacturing capability, and is also a user.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 460: Symposium Z – High-Temperature Ordered Intermetallic Alloys VII , 1996 , 15
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Koch, C.C., Liu, C.T., and Stoloff, N.S., High Temperature Ordered Intermetallic Alloys. (Mater. Res. Soc. Proc. 39, Pittsburgh, PA, 1985).Google Scholar
2. Stoloff, N.S., Koch, C.C., Liu, C.T., and Izumi, O., High Temperature Ordered Intermetallic Alloys II. (Mater. Res. Soc. Proc. 81, Pittsburgh, PA, 1987).Google Scholar
3. Liu, C.T., Taub, A.I., Stoloff, N.S., and Koch, C.C., High Temperature Ordered Intermetallic Alloys II. (Mater. Res. Soc. Proc. 133, Pittsburgh, PA, 1989).Google Scholar
4. Johnson, L.A., Pope, D.P., and Stiegler, J.O., High Temperature Ordered Intermetallic Alloys IV, (Mater. Res. Soc. Proc. 213, Pittsburgh, PA, 1991).Google Scholar
5. Baker, I., Darolia, R., Whittenberger, J.D., and Yoo, M.H., High Temperature Ordered Intermetallic Alloys V. (Mater. Res. Soc. Proc. 288, Pittsburgh, PA, 1993) pp. 971–976.Google Scholar
6. Whang, S.H., Liu, C.T., Pope, D.P., and Stiegler, J.O., High Temperature Aluminides and Intermetallics. (TMS-AIME Proc, Warrendale, PA, 1990), p. 593.Google Scholar
7. Whang, S.H., Liu, C.T., Pope, D.P., and Stiegler, J.O., Mater. Sci. Eng. A152/A153, 746 (1992).Google Scholar
8. Izumi, O., Intermetallic Compounds — Structure and Mechanical Properties. (Japan Institue of Metals, Tokyo, Japan, 1991).Google Scholar
9. Liu, C.T., Cahn, R.W., and Sauthoff, G., Ordered Intermetallics - Physical Metallurgy and Mechanical Behavior. (Kluwer Academic Publishers, Dordrecht, The Netherlands, 1992).Google Scholar
10. Kim, Y.W. and Boyer, R.R., Micro-structure/Properties Relationships in Titanium Aluminides and Alloys. (The Mineral, Metals and Materials Society, Warrendale, PA, 1991).Google Scholar
11. Darolia, R., Lewandowski, J.J., Liu, C.T., Martin, P.L., Miracle, D.B., and Nathal, M.V., Structural Intermetallics. (The Mineral, Metals and Materials Society, Warrendale, PA, 1993).Google Scholar
12. Stoloff, N.S. and Sikka, V.K., Physical Metallurgy and Processing of Intermetallic Compounds. (Chapman and Hall, New York, 1996).Google Scholar
13. Welsch, G. and Desai, P.D., Oxidation and Corrosion of Intermetallic Alloys (Purdue University, West Lafayette, IN, 1996).Google Scholar
14. Deevi, S.C. and Sikka, V.K., Intermetallics, 4(5), 357–335 (1996).Google Scholar
15. Santella, M.L. and Sikka, V.K., Control of Chemistry of Castable Ni3Al-Based Alloy for Welding, unpublished data, 1996.Google Scholar
16. Sikka, V.K., Deevi, S.C., and Vought, J.D., Adv. Mater. Process. 147, 29–31 (1995).Google Scholar
17. Deevi, S.C. and Sikka, V.K., Exo-Melt™ Process for Melting and Casting Intermetallics. Intermetallics (accepted for publication) 1996.Google Scholar
18. Sikka, V.K., Intermetallics for Structural Applications, edited by Welsch, G. and Desai, P.D., (Purdue University, West Lafayette, IN, 1996) pp. 1–119.Google Scholar
19. Sikka, V.K., Commercialization of Nickel and Iron Aluminides. Proceedings of International Conference on Nickel and Iron Aluminides: Processing, Properties, and Applications, ASM International, Materials Park, OH, October 1996 (to be published).Google Scholar
20. Deevi, S.C. and Sikka, V.K., Processing of Transition Metal Suicides for High-Temperature Applications, edited by Natesan, K., Ganesan, P., and Lai, G. (ASM International, Materials Park, OH, 1995) pp. 601–619.Google Scholar
21. Kingery, W.D., Property Measurements at High Temperatures. (John Wiley & Sons, Inc., New York, 1959), p. 200.Google Scholar
22. Natesan, K. and Tortorelli, F., High-Temperature Oxidation and Application of Nickel and Iron Aluminides in Coal Gasification Environments. ASM International, Materials Park, Ohio (to be published).Google Scholar
23. Tortorelli, P.E. and DeVan, J.H., Oxidation and Other Corrosion Phenomena at Intermedia Temperature, edited by Welsch, G. and Desai, P.D. (Purdue University, West Lafayette, IN, 1996) pp. 267–331.Google Scholar
24. Orth, J.E. and Sikka, V.K., Adv. Mater. Process. 148, 33–34 (1995).Google Scholar
25. Orth, J.E., Chen, C., and Orillion, M.T., Mechanical Fatigue and Wear Properties of Cast Nickel Aluminide Ni3Al-Based Alloys. ASM International, Materials Park, OH (to be published).Google Scholar