Hostname: page-component-586b7cd67f-2brh9 Total loading time: 0 Render date: 2024-11-29T07:42:23.946Z Has data issue: false hasContentIssue false
  • English
  • Français

Colloidal Processing of Temperature Shock Resistant SiC with Tailored Porosity

Published online by Cambridge University Press:  10 February 2011

Mesut Aslan ,
Rüdiger Nass  and
Helmut Schmidt
Mesut Aslan
Affiliation:
INM, Ceramic Department, Im Stadtwald, D-66123 Saarbrücken, Germany
Rüdiger Nass
Affiliation:
INM, Ceramic Department, Im Stadtwald, D-66123 Saarbrücken, Germany
Helmut Schmidt
Affiliation:
INM, Ceramic Department, Im Stadtwald, D-66123 Saarbrücken, Germany
Get access

Abstract

From aqueous slurries containing SiC powder coated with nano-scaled carbon black, green bodies were prepared by slip casting. On slip cast green bodies the densification, microstructural development and mechanical properties were investigated. Depending on the sintering temperature and boron carbide content samples with different relative densities between 0.90 and 0.988 were obtained after pressureless sintering. In all samples a homogeneous microstructure (distribution of the residual pores and grain morphology) was observed. Due to this homogeneity the sintered samples showed high amount of fracture strength of about 500 MPa, even at large residual porosities of 10 %. The thermal shock resistance of samples with different porosities measured by water quenching revealed the critical temperature difference to be around 700 K.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 431: Symposium P – Microporous and Macroporous Materials , 1996 , 455
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Nass, R., Aslan, M., Nonninger, R., Schmidt, H., Matje, P.,”New Processing Techniques for the Production of Pressureless Sintered SiC Parts”, Ceramic Transactions, Vol.51, Am.Ceram.Soc., p.645–651, (1995).Google Scholar
[2] Aslan, M., Nonninger, R., Nass, R., Rein, R., Schmidt, H., ”Relations between Microstructure and Mechanical Properties of Pressureless Sintered SiC”, Ceramic Transactions, Vol.51, Am.Ceram.Soc., p.756–761, (1995).Google Scholar
[3] van Rijswijk, W., Shanefield, D. J., Effects of Carbon as a Sintering Aid in Silicon Carbide, J. Am.Ceram. Soc., 73[1], p. 148–149, (1990).Google Scholar
[4] Coppola, J. A., “Investigation of the Fracture Surface Energy, Fracture Strength and Thermal Shock Behaviour of Polcrystalline Materials, A Thesis in Ceramic Science”, The Pennsylvania State University, (1971).Google Scholar
[5] Yamada, K., Mohri, M., ”Properties and Applications of Silicon Carbide Ceramics”, In ”Silicon Carbide Ceramics”, Vol.1, ed., S., Somiya, Y., Inomata, Elsevier Applied Science, p. 13–44, (1991).Google Scholar
[6] Takeda, Y., Maeda, K., ”Thermal Shock Resistance of High Thermal Conductive SiC Ceramics”, J. Ceram. Soc., Japan, Int. Edition, Vol.99, p. 1113–1116, (1991).Google Scholar