Hostname: page-component-cd9895bd7-lnqnp Total loading time: 0 Render date: 2024-12-27T02:15:10.820Z Has data issue: false hasContentIssue false
  • English
  • Français

Characterization of Silicon Oxides Formed by Light-Induced Anodisation for Silicon Solar Cell Surface Passivation

Published online by Cambridge University Press:  31 March 2014

Jie Cui ,
Xi Wang ,
Robert Opila  and
Alison Lennon
Jie Cui
Affiliation:
The University of New South Wales, Sydney 2052, Australia.
Xi Wang
Affiliation:
The University of New South Wales, Sydney 2052, Australia.
Robert Opila
Affiliation:
The University of New South Wales, Sydney 2052, Australia. University of Delaware, Newark, DE 19716, U.S.A.
Alison Lennon
Affiliation:
The University of New South Wales, Sydney 2052, Australia.
Get access

Abstract

In this paper we report the properties of the anodic silicon dioxide film formed using light-induced anodisation (LIA) method and its potential to be used as surface passivation layer of p-type silicon surfaces of silicon solar cells. The high uniformity of the formed oxide is possibly due to the uniform drift of the positive charge carriers in the silicon to the surface being anodised. The oxide grows at higher rate than that in nitric acid, an oxide layer with thickness of 18 nm can be formed by anodising for 10 min with 15 V bias in 0.5 M sulphuric acid. After annealing in oxygen and then forming gas at 400 °C for 30 min, an average effective carrier lifetime of 120 μs was measured by quasi-steady state photoluminance on 180 μm p-type 3-5 Ohm cm Cz silicon wafers, with a value of 110 μs being measured for the same wafers passivated by a thermally-grown oxide of the same thickness. The properties of the anodic silicon dioxide layers formed by LIA have been characterized by ellipsometry, x-ray photoelectron spectroscopy, quasi-steady state photoluminance and Fourier transform infrared spectroscopy.

Keywords

dielectricpassivationoxide
Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1647: Symposium GG – Surface/Interface Characterization and Renewable Energy , 2014 , mrsf13-1647-gg05-05
Copyright
Copyright © Materials Research Society 2014 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Wilking, S., Herguth, A., Hahn, G., Journal of Applied Physics, 113 (2013) 194503-194503–194506.10.1063/1.4804310CrossRefGoogle Scholar
Cousins, P.J., Cotter, J.E., Sol. Energy Mater. Sol. Cells, 90 (2006) 228–240.10.1016/j.solmat.2005.03.008CrossRefGoogle Scholar
Grant, N.E., McIntosh, K.R., IEEE Electron Device Lett., 31 (2010) 1002–1004.10.1109/LED.2010.2052780CrossRefGoogle Scholar
Glunz, S.W., Sproul, A.B., Warta, W., Wettling, W., J. Appl. Phys., 75 (1994) 1611–1615.10.1063/1.356399CrossRefGoogle Scholar
Cui, J., Wang, X., Opila, R., Lennon, A., J. Appl. Phys., 114 (2013) -.Google Scholar
Williams, K.R., Gupta, K., Wasilik, M., J. Microelectromech. Syst., 12 (2003) 761–778.10.1109/JMEMS.2003.820936CrossRefGoogle Scholar
Sze, S.M., Semiconductor Devices - Physics and Technology, John Wiley & Sons, New York, 2002.Google Scholar