Hostname: page-component-78c5997874-lj6df Total loading time: 0 Render date: 2024-11-20T02:27:06.079Z Has data issue: false hasContentIssue false
  • English
  • Français

Characterization of Li7La3Zr2O12 Thin Films Prepared by Pulsed Laser Deposition

Published online by Cambridge University Press:  11 July 2012

Jiajia Tan  and
Ashutosh Tiwari
Jiajia Tan
Affiliation:
Nanomaterials Research Laboratory, Department of Materials Science and Engineering, University of Utah, Salt Lake City, UT 84112, U.S.A.
Ashutosh Tiwari
Affiliation:
Nanomaterials Research Laboratory, Department of Materials Science and Engineering, University of Utah, Salt Lake City, UT 84112, U.S.A.
Get access

Abstract

A pulsed laser deposition system was employed to fabricate thin films of Li7La3Zr2O12 solid electrolyte. The deposition process was carried out at room-temperature, resulting in amorphous films. These as-deposited films had a large optical band gap of 5.13 eV, and exhibited a lithium-ion conductivity of 3.35×10-7 S/cm. The films were then annealed, and the effect of annealing on the optical and electrical properties of the films was examined. After annealing at 1000 °C, the films were found to be cubic with a narrower band gap of 3.64 eV. In addition, these annealed films showed an inferior ionic conductivity than the as-deposited ones.

Keywords

physical vapor deposition (PVD)electrical propertiesenergy storage
Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1471: Symposium YY – Rare-Earth-Based Materials , 2012 , mrss12-1471-yy03-04
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Wang, C., Taherabadi, L., Jia, G., Madou, M., Yeh, Y. and Dunn, B., Electrochem. Solid-Sate Lett. 7, A45 (2004).Google Scholar
2. Hart, R.W., White, H. S., Dunn, B. and Rolison, D.R., Electrochem. Commun. 5 (2), 120 (2003).10.1016/S1388-2481(02)00556-8Google Scholar
3. Jones, S.D. and Akridge, J.R., J. Power Sources 54, 63 (1995).10.1016/0378-7753(94)02041-ZGoogle Scholar
4. Kyeremateng, N.A., Dumur, F., Knauth, P., Pecquenard, B. and Djenizian, T., Electrochem. Commun. 13, 894 (2011).10.1016/j.elecom.2011.03.026Google Scholar
5. Xia, H., Wang, H.L., Xiao, W., Lai, M.O. and Lu, L., Int. J. Surf. Sci. Eng. 3, 23 (2009).10.1504/IJSURFSE.2009.024360Google Scholar
6. Goodenough, J. B., Solid State Microbatteries (Plenum Press, New York, 1990), pp. 174.Google Scholar
7. West, W.C., Whitacre, J.F. and Lim, J.R., J. Power Sources 126, 134 (2004).10.1016/j.jpowsour.2003.08.030Google Scholar
8. Murugan, R., Thangadurai, V. and Weppner, W., Angew. Chem. Int. Ed. 46, 7778 (2007).10.1002/anie.200701144Google Scholar
9. Ohta, Pdf S., Kobayashi, T., Seki, J. and Asaoka, T., J. Power Source 202, 332 (2012).10.1016/j.jpowsour.2011.10.064Google Scholar
10. Tan, J. and Tiwari, A., Electrochem. Solid-State Lett. 15, A37 (2012).10.1149/2.003203eslGoogle Scholar
11. Ezema, F.I and Osuji, R.U., Chalcogenide Lett. 4, 69 (2007).Google Scholar
12. Awaka, J., Kijima, N., Hayakawa, H. and Akimoto, J., J. Solid State Chem. 182, 2046 (2009).10.1016/j.jssc.2009.05.020Google Scholar