Hostname: page-component-848d4c4894-mwx4w Total loading time: 0 Render date: 2024-07-05T01:18:55.769Z Has data issue: false hasContentIssue false
  • English
  • Français

Characterization of Adherence Steels Hardened Superficially

Published online by Cambridge University Press:  26 February 2014

D. Sanchez-Huerta ,
T. De la Mora-Ramírez ,
M.A. Doñu-Ruiz ,
N. López-Perrusquia  and
J. V. Cortés-Suarez
D. Sanchez-Huerta*
Affiliation:
Universidad Politécnica del Valle de México; Grupo Ciencia e Ingeniería de Materiales, UPVM, Tultitlan, Estado de México.
T. De la Mora-Ramírez*
Affiliation:
Universidad Politécnica del Valle de México; Grupo Ciencia e Ingeniería de Materiales, UPVM, Tultitlan, Estado de México.
M.A. Doñu-Ruiz*
Affiliation:
Universidad Politécnica del Valle de México; Grupo Ciencia e Ingeniería de Materiales, UPVM, Tultitlan, Estado de México. Instituto Politécnico Nacional, SEPI-ESIME, Adolfo López Mateos, Zacatenco, México D.F., 07738, México.
N. López-Perrusquia*
Affiliation:
Universidad Politécnica del Valle de México; Grupo Ciencia e Ingeniería de Materiales, UPVM, Tultitlan, Estado de México. Instituto Politécnico Nacional, SEPI-ESIME, Adolfo López Mateos, Zacatenco, México D.F., 07738, México.
J. V. Cortés-Suarez*
Affiliation:
Univerisdad Autónoma Metropolitana Unidad Azcapotzalco, Av. San Pablo 180 Azcapotzalco 02200, México .D.F. Área de Ciencia de los Materiales.
*
a[email protected]
b[email protected]
c[email protected]
d[email protected]
e[email protected]
Get access

Abstract

This study evaluates the behavior of the adherence layers - sawn flat iron boride formed on the surface of steels used in manufacturing industry in Mexico. In steels AISI 1018, AISI 8620 and AISI 316 was characterized this behavior, boriding thermochemical treatment with box technique, with a processing temperature of 1273 °K, with an exposure time of 8 hours. Furthermore the adherence is assessed by the Rockwell C hardness technique prescribed by the German standard VDI 3198 of traction, this impact test qualitatively determine the type of adherence formed three thermochemical steels treated by the technique of boriding. Moreover optical microscopy determines the type of film morphology FeB/ Fe2B of each of the materials exposed to a boriding, also shows the thicknesses of the phases generated in the surface type in all three steels boriding. Phase presence boride FeB/Fe2B was determined by X -ray diffraction (XRD). Technique for scanning electron microscopy (EDS) was evaluated qualitatively the presence of FeB/Fe2B of boronizing. Otherwise determines the hardness and elastic modulus by nanoindentation technique of the phases present in the three steels. Lastly, AISI 1018 and AISI 8620 are bounding scale H1 to H3, the AISI 316 steel has an adherence of H3 to H6 under German standard VDI 3198.

Keywords

adhesionnano-indentationsteel
Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1616: Symposium S5C – Structural and Chemical Characterization of Metals, Alloys, and Compounds - 2013 , 2014 , imrc2013-s5c-p041
Copyright
Copyright © Materials Research Society 2014 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Bindal, C. and Hikmet Ucisik, A., Surface and Coatings Technology 122, 208, (1999).CrossRefGoogle Scholar
Atık, E., Yunker, U., Merıc, C., Tribology International 36, 155, (2003).CrossRefGoogle Scholar
Taktak, S. and Tasgetiren, S., Journal of Materials Engineering and Performance 15, 570 (2006).CrossRefGoogle Scholar
Vidakis, N., Antoniadis, A. and Bilalis, N., J. Mater. Process Technol 143, 481, (2003).CrossRefGoogle Scholar
Benz, D., Verein Deutscher Ingenieure 3198, 7, (1992).Google Scholar
Taktak, S., Materials & Design 28, 1836, (2007).CrossRefGoogle Scholar
Kayali, Y., Yalçin, Y. and Taktak, S., Materials & Design, Volume 32, 4295, (2011).CrossRefGoogle Scholar
López-Perrusquia, N., Campos-Silva, I., Martínez-Trinidad, J., Avilés, A., Alvárez-Castañeda, E., Juárez-Torres, S.. Advanced Materials Research 65, 47, (2009).CrossRefGoogle Scholar
Takagi, K., Koike, W., Momozawa, A. and Fujima, T., Solid State Sciences 14, 1643, (2012).CrossRefGoogle Scholar
Badini, C.. Gianoglio, C., and Pradelli, G., Surf. Coat. Technol 30, 157, (1978).CrossRefGoogle Scholar
Gunes, I., Ulker, S., Taktak, S., Materials & Design 32, 2380, (2011).CrossRefGoogle Scholar
Ozdemir, O., Omar, M.A., Usta, M., Zeytin, S., Bindal, C., Ucisik, A.H., Vacuum 83, 175, (2008).Google Scholar
Sista, V., Kahvecioglu, O., Eryilmaz, O.L., Erdemir, A. and Timur, S., Thin Solid Films 30, 1582, (2011).CrossRefGoogle Scholar
Kulk, M., Makuch, N., Dziarski, P., Piasecki, A., Miklaszewski, A., Optics & Laser Technology 15, 409, (2014).CrossRefGoogle Scholar
Kulka, M., Makuch, N. and Pertek, A., Optics & Laser Technology 45, 308, (2013).CrossRefGoogle Scholar
López-Perrusquia, N., Doñu-Ruiz, M.A., Cortés-Suarez, V.J., Rosado-Cruz, L.D., Sánchez Huitron, D., Advanced Materials Research, 54, 239, (2012).CrossRefGoogle Scholar
López-Perrusquia, N., Doñu-Ruíz, M.A., Vásquez-Ramírez, F., Trujillo-Alfaro, O., Vargas-Oliva, E.Y., Advanced Materials Research, 513, 535, (2012).Google Scholar