Hostname: page-component-78c5997874-fbnjt Total loading time: 0 Render date: 2024-11-20T00:48:07.599Z Has data issue: false hasContentIssue false
  • English
  • Français

Cathodic Protection for Nuclear Waste Packaging Under Gamma Ray Irradiation by Using TiO2 Coating Combined with Glass Scintillators

Published online by Cambridge University Press:  15 February 2011

Ryutaro Fujisawa  and
Shigeo Tsujikawa
Ryutaro Fujisawa
Affiliation:
The University of Tokyo, Faculty of engineering, Department of Metallurgy, 7–3–1 Hongo, Bunkyo-ku, Tokyo, 113 JAPAN
Shigeo Tsujikawa
Affiliation:
The University of Tokyo, Faculty of engineering, Department of Metallurgy, 7–3–1 Hongo, Bunkyo-ku, Tokyo, 113 JAPAN
Get access

Abstract

The photoelectrochemical behaviours of a TiO2 single crystal and TiO2 coating were studied, for the purposes of cathodic protection of stainless steels and Cu via the TiO2 coating combined with glass scintillators under gamma ray irradiation. It was confirmed that a TiO2 coating could protect 304 stainless steel cathodically from crevice corrosion under illumination. A logarithmic relationship between the photopotential of single crystal TiO2(rutile) and light intensity was found, moreover, the photopotential was found to be least noble when wavelength equals 375 nm. Under illumination by gamma rays combined with the glass scintillators, the electrode potential of single crystal TiO2 was found to shift in the less noble direction by about 200 mV. Therefore, the technique of cathodic protection by TiO2 coating is considered to be applicable to protect the packaging metal from corrosion for a long time.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 353: Symposium – Scientific Basis for Nuclear Waste Management XVIII , 1994 , 735
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Fujishima, A., Honda, K. and Kikuchi, S.: Kogyo-Kagaku Zassi, 72, 108–113 (1969)Google Scholar
2. Imokawa, T., Fujisawa, R., Shinohara, T., Tsujikawa, S., and Suda, A.: Zairyo-to-Kankyo, 43, 482–486 (1994)Google Scholar
3. Yuan, J., Fujisawa, R., and Tsujikawa, S.: Zairyo-to-Kankyo, 43, 433–440 (1994)Google Scholar
4. Yoko, T., Kamiya, K., and Sakka, S.: Yogyo-Kyokai-Shi, 95, 150(1987)Google Scholar
5. Fujisawa, R., Shinohara, T. and Tsujikawa, S.: Proceeding of 40th Japan Corrosion Conference, 1993, 37 Google Scholar
6. Yoko, T., Kamiya, K., and Sakka, S.: Bulletin of the Japan Institute of Metals, 28, 176(1989)Google Scholar
7. Salvador, P.: J. Appl. Phys.,55,2977(1984)Google Scholar
8. Okayama, S., Uesugi, K., and Tsujikawa, S.: Bosyoku-Gyujutu, 36, 157(1987)Google Scholar
9. Brochure No. 126 P Scintillators for the Physical Science (Nuclear Enterprises Inc., February 1980)Google Scholar