Hostname: page-component-78c5997874-j824f Total loading time: 0 Render date: 2024-11-20T00:30:15.367Z Has data issue: false hasContentIssue false
  • English
  • Français

Cadmium Telluride Thin Films Grown By Atomic Layer Epitaxy

Published online by Cambridge University Press:  16 February 2011

Arla Kytökivi ,
Yrjö Koskinen ,
Aimo Rautiainen  and
Jarmo Skarp
Arla Kytökivi
Affiliation:
Microchemistry Ltd., P.O.Box 45, SF-02151 Espoo, Finland
Yrjö Koskinen
Affiliation:
Microchemistry Ltd., P.O.Box 45, SF-02151 Espoo, Finland
Aimo Rautiainen
Affiliation:
Microchemistry Ltd., P.O.Box 45, SF-02151 Espoo, Finland
Jarmo Skarp
Affiliation:
Microchemistry Ltd., P.O.Box 45, SF-02151 Espoo, Finland
Get access

Abstract

Polycrystalline CdTe films up to 2 μm thick were grown by Atomic Layer Epitaxy (ALE) at 350–450°C. The growth was carried out in a lateral flow reactor, using the elements as source materials and 25 cm2 glass/ITO and glass/ITO/SnO2 as substrates. A growth of CdS film by ALE preceded the growth of CdTe.

Profilometry, X-ray diffraction analysis and scanning electron microscopy were used to characterize the films.

The relatively high vapor pressure of CdTe determined the upper limit of the processing window, while the small vapor pressure of Te2 set a practical lower limit of 390–400°C.

The CdTe films were smooth up to 100–500 nm depending on the temperature and the substrate surface. Development of surface roughness was detected as the growth process proceeded. At the same time there was an increase of the effective surface area of the film, observed as a significant increase in the macroscopic growth rate. The greater surface roughness was also evident in the reduced degree of (111) orientation.

The CdS/CdTe structure was investigated for its potential in solar cell applications.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 222: Symposium D – Atomic Layer Growth and Processing , 1991 , 269
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Chu, T.L., in Current topics in photovoltaics, vol.3, edited by Coutts, T.J. and Meakin, J.D., (Academic Press, London, 1988), pp. 264–300.Google Scholar
2. Banarjee, A., Saha, H., Guha, R., Indian J. Phys. 65A, 326 (1989).Google Scholar
3. Suntola, T. Materials Science Reports 4, 261 (1989).Google Scholar
4. Pessa, M., Huttunen, P., Herman, M.A., J. Appl. Phys. 54, 6047 (1983).Google Scholar
5. Faschinger, W, Sitter, H. Juza, P., J. Appl. Phys. 53, 2519 (1988).Google Scholar
6. Faschinger, W. and Sitter, H., J. Cryst. Growth 99, 566 (1990).Google Scholar
7. Skarp, J., Koskinen, Y., Lindfors, S., Rautiainen, A., Suntola, T., Proc., 10th European Photovoltaic Solar Energy Conf., 8–12 April, 1991, Lisbon, Portugal (in press).Google Scholar