Hostname: page-component-78c5997874-dh8gc Total loading time: 0 Render date: 2024-11-19T15:37:27.296Z Has data issue: false hasContentIssue false
  • English
  • Français

Bioactive Hydroxyapatite-Polysulfone Composite for Tissue Replacement

Published online by Cambridge University Press:  10 February 2011

B Chua  and
M Wang
B Chua
Affiliation:
School of Mechanical and Production Engineering, Nanyang Technological University Nanyang Avenue, Singapore 639798
M Wang
Affiliation:
School of Mechanical and Production Engineering, Nanyang Technological University Nanyang Avenue, Singapore 639798
Get access

Abstract

A new composite material consisting of hydroxyapatite (HA) and polysulfone (PSU) was produced and evaluated for potential medical applications. The HA/PSU composite containing up to 40vol% of particulate HA was manufactured via a standardised procedure which included drying, compounding, and injection or compression moulding. Defect-free composite samples (bars, discs and dumbbell specimens) could be obtained by injection moulding. Thick composite plates suitable for making fatigue specimens were compression moulded. Both compounded materials and moulded parts were assessed using various techniques. It was found that HA particles were well dispersed in the PSU matrix. Thermogravimetric analysis verified the amount of HA in the composite. Density close to the theoretical value could be achieved for the composite, indicating a void-free structure. Differential scanning calorimetry results indicated that the glass transition temperature of the polymer matrix was not significantly affected by the incorporation of HA. Rheological analysis revealed that PSU and the composite exhibited pseudoplastic flow behaviour at processing temperatures. It was shown that the hardness and modulus of the composite were increased with an increase in HA volume percentage.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 599: Symposium DD – Mineralization in Natural & Synthetic Biomaterials , 1999 , 45
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Park, J.B., Biomaterials: An Introduction, Plenum Press, New York, 1979 Google Scholar
2. Bonfield, W., Grynpas, M.D., Tully, A.E., Bowman, J., Abram, J., Biomaterials, Vol.2 (1981), 185–186 Google Scholar
3. Wang, M., Kokubo, T., Bonfield, W., Bioceramics, Vol.9 (1996), 387–390 Google Scholar
4. Wang, M., Hench, L.L., Bonfield, W., JBiomedMater Res, Vol.42 (1998), 577–586 Google Scholar
5. Taurio, R., Tormala, P., Bioceramics, Vol.4 (1991), 287–294 Google Scholar
6. Shikinami, Y., Hata, K., Okuno, M., Bioceramics, Vol.9 (1996), 391–394 Google Scholar
7. Bonfield, W., Bowman, J.A., Grynpas, M.D., UK Patent GB 2085461B, (1984)Google Scholar
8. Bonfield, W., Bioceramics, Vol.9 (1996), 11–13 Google Scholar
9. Tanner, K.E., Downes, R.N., Bonfield, W., Br Ceram Trans, Vol.93 (1994), 104–107 Google Scholar
10. Swain, R.E., Wang, M., Beale, B., Bonfield, W., Biomed EngAppl Basis Comm, Vol.11 (1999),Google Scholar
11. Wang, M., Porter, D., Bonfield, W., Br Ceram Trans, Vol.93 (1994), 91–95 Google Scholar
12. Wang, M., Deb, S., Tanner, K.E., Bonfield, W., Proceedings of the 7th European Conference on Composite Materials, London, U.K., 1996, Vol.2, 455–460 Google Scholar
13. Wang, M., Ward, I.M., Bonfield, W., Proceedings of the 11thInternational Conference on Composite Materials, Gold Coast, Australia, 1997, Vol.1, 488–495 Google Scholar
14. Black, J., Hastings, G., (eds.), Handbook of Biomaterial Properties, Chapman & Hall, London, 1998 Google Scholar
15. Wang, M., Yang, X.Y., Khor, K.A., Wang, Y., J Mater Sci Mater Med, Vol.10 (1999), 269–273 Google Scholar
16. Edirisinghe, M.J., Evans, J.R.G., Br Ceram Trans, Vol.86 (1986), 18–22 Google Scholar
17. Wang, M., Yue, C.Y., Chua, B., to be publishedGoogle Scholar