No CrossRef data available.
Article contents
Bacterial Adhesion to Nanomodified Surfaces: Dynamic Flow Effects on S. aureus and P. aeruginosa
Published online by Cambridge University Press: 27 February 2013
Abstract
Ventilator associated pneumonia (VAP) is a serious and costly clinical problem. Specifically, receiving mechanical ventilation over 24 hours increases the risk of VAP and is associated with high morbidity, mortality and medical costs. Cost effective endotracheal tubes (ETTs) that are resistant to bacterial infection would help to prevent this problem. The objective of this study was to determine differences in bacterial growth on nanomodified and unmodified ETTs under dynamic airway conditions. A bench top model based upon the general design of Hartmann et al. (1999) was constructed to test of the effectiveness of nanomodified ETTs under the airflow conditions present in the airway. Twenty-four hour studies performed in a dynamic flow chamber showed a marked difference in the biofilm formation on different areas of unmodified tubes. Areas where tubes were curved, such as at the entrance to the mouth and the connection between the oropharynx and the larynx, seemed to collect the largest amount of biofilm.
The biofilm formation on ETTs in the airflow system after 24 hours showed a large difference depending upon where tubes were oriented within the apparatus. This illustrates the importance of dynamic flow on biofilm formation in pediatric ETTs. It is of particular interest that increased biofilm density on both unmodified and nanomodified tubes appeared to occur at curves in the tube where changes in flow pattern occurred. This emphasizes the need for more accurate models of airflow within pediatric ETTs, suggesting that not only does flow affect pressure gradients along the tube, but in fact, determines the composition of the film itself. More testing is needed to determine the effects of biofilm formation on the efficiency of ETT under airflow, however this study provides significant evidence for nanomodification alone (without the use of antibiotics) to decrease bacteria function.
Keywords
- Type
- Articles
- Information
- Copyright
- Copyright © Materials Research Society 2013