Hostname: page-component-586b7cd67f-t8hqh Total loading time: 0 Render date: 2024-11-29T07:49:28.537Z Has data issue: false hasContentIssue false
  • English
  • Français

Atomistic Simulations of Ti Additions to NiAl

Published online by Cambridge University Press:  15 February 2011

Guillermo Bozzolo ,
Ronald D. Noebe ,
Anita Garg ,
John Ferrante  and
Carlos Amador
Guillermo Bozzolo
Affiliation:
Analex Corporation, 3001 Aerospace Parkway, Brook Park, OH, 44142–1003
Ronald D. Noebe
Affiliation:
National Aeronautics and Space Administration, Lewis Research Center, Cleveland, OH 44135.
Anita Garg
Affiliation:
National Aeronautics and Space Administration, Lewis Research Center, Cleveland, OH 44135.
John Ferrante
Affiliation:
National Aeronautics and Space Administration, Lewis Research Center, Cleveland, OH 44135.
Carlos Amador
Affiliation:
Facultad de Química, Universidad Nacional Autónomade México, Ciudad Universitaria, 04510, Distrito Federal, México
Get access

Abstract

The development of more efficient engines and power plants for future supersonic transports depend on the advancement of new high-temperature materials with temperature capabilities exceeding those of Ni-based superalloys. Having theoretical modelling techniques to aid in the design of these alloys would greatly facilitate this development. The present paper discusses a successful attempt to correlate theoretical predictions of alloy properties with experimental confirmation for ternary NiAl-Ti alloys. The B.F.S. (Bozzolo- Ferrante-Smith) method for alloys is used to predict the solubility limit and site preference energies for Ti additions of 1 to 25 at. % to NiAl. The results show the solubility limit to be around 5 % Ti, above which the formation of Heusler precipitates is favored. These results were confirmed by transmission electron microscopy performed on a series of NiAl-Ti alloys.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 460: Symposium Z – High-Temperature Ordered Intermetallic Alloys VII , 1996 , 443
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Walston, W. S., Field, R. D., Dobbs, J. R., Lahrman, D. F. and Darolia, R., in Structural Intermetallics. Darolia, R. et al. eds., The Minerals, Metals and Materials Society, 1993, pp. 523–532.Google Scholar
[2] Darolia, R., Walston, W. S. and Nathal, M. V., in Superalloys 1996, Kissinger, R. D. et al. eds., The Minerals, Metals and Materials Society, 1996, pp. 561–570.Google Scholar
[3] Strutt, P. R., Polvani, R. S. and Ingram, J. C., Met. Trans. A, 7A (1976) 23.Google Scholar
[4] Nix, W. D. and Dauskardt, R. H., ‘High Temperature Deformation and Fracture Resistance of Single Crystals of NiAl and NiAl-based Intermetallic Alloys’, Annual Progress Report for AFOSR Grant No. AF-F49620–95–1–0163, Sept. 1996.Google Scholar
[5] Bozzolo, G. and Ferrante, J., J. Computer-Aided Mater. Design, 1 (1993) 305, and references therein.Google Scholar
[6] Smith, J. R., Perry, T., Banerjea, A., Ferrante, J. and Bozzolo, G., Phys. Rev. B 44 (1991) 6444.Google Scholar
[7] Bozzolo, G., Amador, C., Ferrante, J. and Noebe, R. D., Ser. Met. Mater., 33 (1995) 1907.Google Scholar
[8] Bozzolo, G., Noebe, R. and Ferrante, J., to be published.Google Scholar
[9] Wolverton, C., Ceder, G., de Fontaine, D. and Dreysse, H., Phys. Rev. B45 (1992) 13105.Google Scholar