Hostname: page-component-78c5997874-s2hrs Total loading time: 0 Render date: 2024-11-19T05:28:32.707Z Has data issue: false hasContentIssue false
  • English
  • Français

Applications of Silicon Nitride Based Ceramics in the U.S.

Published online by Cambridge University Press:  25 February 2011

R. Nathan Katz
R. Nathan Katz*
Affiliation:
Army Research Laboratory – Materials Directorate Watertown, MA 02172
Get access

Abstract

Silicon nitride based ceramics have unique combinations of mechanical, thermal-physical and electrical properties. Additionally, silicon nitride based materials can be fabricated into near net shape components by several processing routes. This unique combination of properties and processing versatility have encouraged the use of silicon nitride based ceramics in a variety of demanding commercial applications over the past decade. In the U.S., these applications currently include cutting tools, bearings, and selected components for diesel engines. Projected future applications include a broader range of reciprocating and gas turbine engine components, and electronic components. For each of these applications examples of use and the key properties of silicon nitride which enable enhanced systems performance will be discussed. Several materials developments which may broaden the range of applicability of silicon nitride based ceramics will be described.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 287: Symposium K – Silicon Nitride Ceramics–Scientific and Technological Advances , 1992 , 197
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Schutzenberger, P.,“On Silicon Nitride”, C.R. Acad. Sci. (Paris), vol 89, 644–46 (1879)Google Scholar
2. Mehner, H., German Patent 88999, September 30, 1896 Google Scholar
3. Kingery, W.D., Japanese / American Technological Inovation, ( Elsevier Science Pub.,New York, 1991 pp 161–205 Google Scholar
4. Katz, R. N., Interceram, 1992, 231–33Google Scholar
5. Greskovich, C., Prochazka, S., and Rosolowski, J. H., in Nitrogen Ceramics, ed., Riley, F. ( Noordhoff International Pub., Lyden, 1977) 351–57Google Scholar
6. Lenoe, E. M., Katz, R. N., and Burke, J. J., Ceramics for High Performance Applications III: Reliability, ( Plenum Press, New York, 1983)Google Scholar
7. Tennery, V., Proceedings of thr 3rd International Symposium on Ceramic Materials and Components for Engines, ( American Ceramic Soc., Columbus, OH, 1989 )Google Scholar
8. Smyth, J. R., in Ceramics and Glasses, vol.4 Engineered Materials Handbook ( ASM International 1991 ) pp 995–1002 Google Scholar
9. Mangels, J. A.,Progress in Nitrogen Ceramics, ed. Riley, F., (Martinus Nijhoff Publishers, Boston, 1983 )pp 231–36Google Scholar
10. Torti, M., in ref 6, p 261 Google Scholar
11. Gazza, G. E. and Katz, R. N. in Pressure Effects on Materials Processing and Design, eds. Ishizaki, K., Hodge, E., Concannon, M. ( Mater. Res. Soc. Proc. 251, Pittsburgh, PA, 1992) pp. 199–209 Google Scholar
12. Larker, H., in ref 9, p 717 Google Scholar
13. Jack, K. H., this volume;J. M<ater. Sci., 11, (1976) pp 1135–1158 Google Scholar
14. Anderson, L. R., Cutting Tool Engineer, April (1990), pp.65–70 Google Scholar
15. Adams, J. H., Anschutz, R., and Whitefield, G., in Ceramics and Glasses. vol 4 Engineered Materials Handbook (ASM International, 1991 ) pp 966–972 Google Scholar
16. Beeghly, C. W. and Shuster, A. F., presented at the Conf. on Adv. Tool Materials for High Speed Machining, Scottsdale, AZ 25–27 Feb. 1987, ASM preprint 8701-002Google Scholar
17. Geiger, G., Am. Ceram. Soc. Bulletin, 71, [10], (1992) p 1474 Google Scholar
18. Stephan, P. M., Am. Cer. Soc. Bulletin, 71, [11],(1992) pp 1623–29Google Scholar
19. Katz, R. N. and Hannoosh, J. G., Int. J. High Technology Ceramics, I,(1985) pp 69–79; R. N. Katz, in Friction and Wear of Advanced Ceramics, ed. S. Jahanmir ( to be published by Marcel Dekker,1993 )Google Scholar
20. Lucek, J. W., Rolling Wear of Silicon Nitride Bearing Materials, Am. Soc. of Mech. Engineers paper 90-GT-165 (1990)Google Scholar
21. Hanson, R. A. and Ogden, W. P., in Split Ball Bearing Features ( pub. by MPB Corp.) April 1991, pp 1–7 Google Scholar
22. Katz, R. N.,Stuctural Ceramics, ed.Wachtman, J. (Academic Press, Boston, 1989 ) pp 1–26 Google Scholar
23. Kamo, R., in Ceramics and Glasses. vol 4 Engineered Materials Handbook, (ASM International, 1991 ) pp 987–994 Google Scholar
24. Lindgren, L. C., Holtman, R. L., Kannmacher, K. D., Petty, J.D., and Costakis, G.A., in Ceramics and Glasses, vol 4 Engineered Materials Handbook, ibid, pp 716–721 Google Scholar
25. Baker, C.C. and Baker, D. E., in Ceramics and Glasses, vol 4 Engineered Materials Handbook, ibid, pp 722–727 Google Scholar
26. Panzarino, J, Norton Co. ( private communication )Google Scholar
27. R & D Magazine, October 1991, p 41 Google Scholar
28. Nestlerode, S., Ceramic Industry July 1992, pp 40–44 Google Scholar
29. Sullivan, T. M., Ceramic Industry October 1992, pp 31–34 Google Scholar
30. Messier, D. R., Revue de Chemie Minral, 22, 1985, pp518–533 Google Scholar
31. Leatherman, G. L., El-Korchi, T., Hoolmes, T. and Katz, R. N. inFiber reinforced Cementitious Materials, eds. Mindess, S. and Skalny, J. ( Mat. Res. Soc. Proc. 211, Pittsburg, PA, 1991) pp105–110 Google Scholar
32. High Tech Materials Alert, September 1992, p 3 Google Scholar