Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by Crossref.
Hawley, Martin C.
and
Wei, Jianghua
1990.
Processing of Polymers and Polymer Composites In a Microwave Applicator.
MRS Proceedings,
Vol. 189,
Issue. ,
Ayappa, K. G.
Davis, H. T.
Davis, E. A.
and
Gordon, J.
1991.
Analysis of microwave heating of materials with temperature‐dependent properties.
AIChE Journal,
Vol. 37,
Issue. 3,
p.
313.
Ayappa, K. G.
Davis, H. T.
Davis, E. A.
and
Gordon, J.
1992.
Two‐dimensional finite element analysis of microwave heating.
AIChE Journal,
Vol. 38,
Issue. 10,
p.
1577.
Hawley, Martin C.
Wei, Jianghua
and
Adegbite, Valerie
1994.
Microwave Processing of Polymer Composites.
MRS Proceedings,
Vol. 347,
Issue. ,
Rogers, D G
Bialkowski, M E
Hill, Djt
and
George, G A
1998.
Kinetic Study of Epoxy-Amine Microwave Cure Reactions. Part I: Design and Operation of a Single-Mode Resonant Microwave Cavity.
High Performance Polymers,
Vol. 10,
Issue. 4,
p.
341.
Link, G.
Feher, L.
Thumm, M.
Ritzhaupt-Kleissl, H.-J.
Bohme, R.
and
Weisenburger, A.
1999.
Sintering of advanced ceramics using a 30-GHz, 10-kW, CW industrial gyrotron.
IEEE Transactions on Plasma Science,
Vol. 27,
Issue. 2,
p.
547.
Ahmed, Ammar
and
Siores, Elias
2001.
Microwave joining of 48% alumina–32% zirconia–20% silica ceramics.
Journal of Materials Processing Technology,
Vol. 118,
Issue. 1-3,
p.
88.
Link, G.
Rhee, S.
Feher, L.
and
Thumm, M.
2001.
Ceramic Materials and Components for Engines.
p.
457.
Hill, David J. T.
George, Graeme A.
and
Rogers, David G.
2002.
A systematic study of the microwave and thermal cure kinetics of the DGEBA/DDS and DGEBA/DDM epoxy‐amine resin systems.
Polymers for Advanced Technologies,
Vol. 13,
Issue. 5,
p.
353.
Park, H.C.
Park, Y.J.
and
Stevens, R.
2004.
Synthesis of alumina from high purity alum derived from coal fly ash.
Materials Science and Engineering: A,
Vol. 367,
Issue. 1-2,
p.
166.
Choi, Young-ik
Jung, Byung-gil
Sung, Nak-chang
and
Han, Young-rip
2015.
A study on the drying characteristics from mixture of food waste and sawdust by using microwave/inner-cycle thermal-air drying process.
Journal of Material Cycles and Waste Management,
Vol. 17,
Issue. 2,
p.
359.
Ahajjam, Younes
Aghzout, Otman
Cataia-Civera, Jose Manuel
Penaranda-Foix, Felipe L.
and
Driouach, Abdellah
2018.
AN ADVANCED ELECTRICAL PROPERTIES MEASUREMENT APPROACH WITH A DESIGNED BI-STATIC ULTRA-WIDEBAND IMPULSE RADAR SENSOR.
Progress In Electromagnetics Research M,
Vol. 75,
Issue. ,
p.
167.
Kalemtaş, Ayşe
Özey, Nigar
and
Aytekin Aydin, Meryem Türkay
2018.
Processing of layered porous mullite ceramics.
Journal of the Australian Ceramic Society,
Vol. 54,
Issue. 3,
p.
545.
Huang, Xiaodi
Hwang, Jiann-Yang
and
Kauppila, Rick
2021.
Materials Engineering—From Ideas to Practice: An EPD Symposium in Honor of Jiann-Yang Hwang.
p.
113.