Hostname: page-component-cd9895bd7-p9bg8 Total loading time: 0 Render date: 2024-12-27T02:07:24.646Z Has data issue: false hasContentIssue false

Application of the G'/D Raman Ratio for Purity Assessment of Multi-Walled Carbon Nanotubes

Published online by Cambridge University Press:  01 February 2011

Roberta DiLeo
Affiliation:
[email protected], Rochester Institute of Technology, Physics, 85 Lomb Memorial Drive, Rochester, NY, 14623, United States
Brian Landi
Affiliation:
[email protected], Rochester Institute of Technology, Physics, 85 Lomb Memorial Drive, Rochester, NY, 14623, United States
Ryne Raffaelle
Affiliation:
[email protected], Rochester Institute of Technology, Physics, 85 Lomb Memorial Drive, Rochester, NY, 14623, United States
Get access

Abstract

Carbonaceous purity assessment methods are being sought after for all types of carbon nanotubes as a means to standardize the material metrology. Our most recent work has evaluated chemical vapor synthesized multi-walled carbon nanotubes (MWNTs). This effort included a protocol for assessment involving qualitative information from scanning electron microscopy (SEM) images and quantitative information from thermogravimetric analysis (TGA) and Raman spectroscopy. Presently, the analysis using Raman spectroscopy on a constructed sample set has been extended to a second excitation energy (HeNe laser at 1.96 eV) and the similar trends in the relative Raman peak ratios have been measured. In contrast to the G-band, the D and G' peaks demonstrate a Raman shift that is excitation energy-dependent, consistent with the double resonance theory. However, the Raman ratio of IG'/ID is independent of excitation energy and is observed to be the most sensitive to MWNT carbonaceous purity. Application of this approach to MWNT arrays grown on SiO2 is compared to conventional bulk powders synthesized under similar conditions. The MWNT arrays show a high degree of vertical alignment based upon SEM and a measured carbonaceous purity using the IG'/ID ratio of 75% w/w.

Type
Research Article
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Iijima, S., Nature (London) 354, 56, (1991).Google Scholar
2. Raffaelle, R. P., Landi, B. J., Harris, J. D., Bailey, S. G., and Hepp, A. F., Mater. Sci. Eng. B, 116, 233, (2005).Google Scholar
3. Marcus, M. S., Simmons, J. M., Castellini, O. M., Hamers, R. J., and Eriksson, M. A., J. Appl. Phys. 100, 084036.1, (2006).Google Scholar
4. Xu, Y., Zhang, Y., Suhir, E., and Wang, X., J. Appl. Phys. 100, 074302.1, (2006).Google Scholar
5. Zhao, G. L., Bagayoko, D., and Yang, L., J. Appl. Phys. 99, 114311.1 (2005).Google Scholar
6. Modi, A., Koratkar, N., Lass, E., Wei, B. Q., and Ajayan, P. M., Nature (London) 424, 171, (2003).Google Scholar
7. Li, J., Ye, Q., Cassell, A., Nq, H. T., Stevens, R., Hans, J., and Meyyappan, M., Appl. Phys. Lett. 82, 2492, (2003).Google Scholar
8. Jiang, K. L., Li, Q. Q., and Fan, S. S., Nature (London) 419, 801 (2002).Google Scholar
9. DiLeo, R. A., Landi, B. J., and Raffaelle, R. P., J. Appl. Phys. 101, 064307, (2007).Google Scholar
10. Harris, J. D., Raffaelle, R. P., Gennett, T., Landi, B. J., and Hepp, A. F., Mater. Sci. Eng. B, 116, 369 (2005).Google Scholar
11. Saito, R. et al. , New J. Phys. 5, 157.1, 2003).Google Scholar
12. Souza, M. et al. , Phys. Rev. B 69, 241403, (2004).Google Scholar