Hostname: page-component-78c5997874-dh8gc Total loading time: 0 Render date: 2024-11-19T04:45:03.638Z Has data issue: false hasContentIssue false
  • English
  • Français

Application of Piezoelectric Materials for Use as Actuators and Sensors in Hard Disk Drive Suspension Assemblies

Published online by Cambridge University Press:  15 February 2011

J. R. Heffelfinger  and
D. A. Boismier
J. R. Heffelfinger
Affiliation:
Advanced Materials Development, Hutchinson Technology Inc., 40 West Highland Park, Hutchinson, MN, 55350, U.S.A
D. A. Boismier
Affiliation:
Advanced Materials Development, Hutchinson Technology Inc., 40 West Highland Park, Hutchinson, MN, 55350, U.S.A
Get access

Abstract

Suspension assemblies, the mechanical arm that supports the read/write head in a Hard Disk Drive (HDD), are incorporating piezoelectric motors for dual-stage actuation. With high displacements and high Curie Temperatures, lead zirconium titanate (PZT) is the preferred piezoelectric material for this application. In this study, commercially available PZT is studied for critical material properties that include strength, aging and particulate generation. An average PZT strength of 111.7 MPa and a Weibull parameter (m) of 12.18 was measured for the material. Aging rates of the dielectric constant vary between 1.9 to 3.2 % per time decade depending on the test condition. The attachment of PZT motors to the suspension assembly provides a method of sensing suspension resonance, shock and temperature fluctuations. Fast Fourier Transform (FFT) analysis of voltage generation of the PZT during drive operation identified a frequency of 6509 Hz that is within 0.2% of the measured resonance frequency of the suspension. The PZT generated several volts for shock events between 500 to 2000 G's of the suspension. Implications of the material parameters and potential sensing capabilities of the PZT are discussed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 604: Symposium LL – Materials for Smart Systems III , 1999 , 197
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Bennin, J., Insight May/June, pp. 8–10 (1999).Google Scholar
2 Evans, R. B., Greisbach, J. S. and Messner, W. C., IEEE Transactions on Magnetics, 35, No. 2, pp. 977–982 (1999).10.1109/20.753819Google Scholar
3 Mori, K., Munemoto, T., Otsuki, H., Yamaguchi, Y., and Akagi, K., IEEE Transactions on Magnetics, 27, No. 6, pp. 5298–5300 (1991).10.1109/20.278818Google Scholar
4 Cheung, P., Horowitz, R. and Howe, R. T., IEEE Transactions on Magnetics, 32, No. 1, pp. 122–128 (1996).10.1109/20.477561Google Scholar
5 Wallash, A., IEEE Transactions on Magnetics, 24, No. 6, pp. 2763–2765 (1988).10.1109/20.92238Google Scholar
6 Wachtman, J. B., Mechanical Properties of Ceramics, John Wiley & Sons, Inc., New York, N.Y., 1996, pp. 89–115.Google Scholar
7 Pan, W. Y., Shrout, T. R. and Cross, L. E., J. Mater. Sci. Lett., 8, pp. 771–776 (1989).10.1007/BF01730133Google Scholar