Hostname: page-component-5c6d5d7d68-xq9c7 Total loading time: 0 Render date: 2024-08-23T10:10:58.942Z Has data issue: false hasContentIssue false
  • English
  • Français

Application of Ftir Spectroscopy to the Characterization of as-Deposited and Chemical Mechanical Polished (CMP) Electron Cyclotron Resonance (ECR) Plasma Based SiO2 Films

Published online by Cambridge University Press:  22 February 2011

Mukesh Desai ,
Ron Carpio ,
Rahul Jairath ,
Matt Stell  and
Robert Tolles
Mukesh Desai
Affiliation:
On assignment from IBM Corporation, SEMATECH, 2706 Montopolis Drive, Austin, Texas 78741
Rahul Jairath
Affiliation:
On assignment from National Semiconductor Corporation, SEMATECH, 2706 Montopolis Drive, Austin, Texas 78741
Matt Stell
Affiliation:
On assignment from Digital Equipment Corporation SEMATECH, 2706 Montopolis Drive, Austin, Texas 78741
Get access

Abstract

FTIR spectroscopy has been used to characterize as-deposited and chemical mechanical polished (CMP) electron cyclotron resonance (ECR) plasma based SiOx films. The ECR films were deposited at different O2/SiH4 gas ratios in an attempt to vary the film stochiometry. Transmission and reflectance-absorbance IR spectral data were combined with CMP removal rate information to characterize the SiOx films and their polishing behavior. The asymmetric O-Si-O stretching (ASM) and Si-OH vibrational bands were found to be principal sources of information.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 324: Symposium K – Diagnostic Techniques for Semiconductor Materials Processing , 1993 , 249
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Davari, B. et al, IEDM Tech. Digest 1989, pg 61, IEEE, 1989 Google Scholar
2. Jairath, R. et al, Proc. Advanced Metallization for ULSI Applications (in press), 1993.Google Scholar
3. Trogolo, J.A. & Rajan, K, Proc. Mat. Res. Soc., Vol 260, pg 869, 1992 Google Scholar
4. Cohen, S.A. et al, J. Electrochem. Soc., Vol 139, No. 12, pg 3572, 1992 Google Scholar
5. Theil, J.A. et al, J. Vac. Sci. Technol. A, Vol 8, No. 3, pg 1374, 1990 CrossRefGoogle Scholar